Universal cable company remote control codes

Contact your cable company for the information

I need the codes for my brighthouse cable remote. can anyone help?

What remote do you have? http://support.brighthouse.com/Article/User-Manual-Cable-Remote-Control-7379/

below is a list of remote's and the codes for a Vizio Tv.
If your remote is listed as NO CODE then you need to have your cable provider issue you a newer remote. most of the time its free.


Atlas - 0864, 0885, 1756

CLIKR-5 - 386 387

UR3-SR3S - 004 031
AT8400-D - NO CODE
AT8550 - NO CODE
AT2300 - NO CODE
AT8400 - NO CODE
BR-350 - NO CODE

I’m happy to help further over the phone at https://www.6ya.com/expert/paul_0af9b1d5c0eb4fc3

There are "SMART" Universal Remotes out there that can be set to Learn the signal from the original remote when you point it at the new one and hit the button you want it to learn.

Hi,
This is a brighthouse problem not a TV problem, if brighthouse won't help you just use the original or substitue remote.
The brighthouse remote may locate the correct frequency using the scan method ask them to send a remote book.
Thanks
Roety

I’m happy to help further over the phone at https://www.6ya.com/expert/eric_ab7c09ec01841771

If your tv has inputs for many devices you can connect them. You need to simply change the tv input SOURCE to whatever #/type of input you want to view from.

You can use an y remote if programmed properly- that is another issue. programming the remote to control that deviovce but first see if it works right.

if the brighthouse remote can control the tv, change the input or source to whatever the dvd is in, other wise try the tv remote.

make it simple first, then you can try getting the one remote to control it IF it can.

my cable remote cannot control all my devices but does the tv.

Olevia TV Remote Control Codes #tbltrouble TD { BORDER-BOTTOM: #cccccc 1px dotted; PADDING-LEFT: 2px }
Remote manufactures and service providers continuously add support for new TV products. If you have the following Satellite or Cable Systems, try these remote codes for all 2 Series, 3 Series, 4 Series, 5 Series, and 7 Series Olevia HDTVs.

Also available is the Olevia Universal Learning Remote RC-LRN that offers component programming of most video hardware including your Cable or Satellite Receivers, VCR's, Tivo's, DVD, Blue-Ray™ or even HD- DVD players.

The learning remote is available, please call at 866-965-3842

Satellite TV Systems Dish Network Remote Codes 506 or 127 Direct TV Remote Codes 506 or 127 Direct TV (Remote Model RC-64RB) Remote Codes 11144, 11240, 11331, or 11610 Cable TV Systems Cable Vision Remote Codes 506 Charter (Moxie Box) Remote Codes 1144 or 1178 Comcast Remote Codes 11144, 11240, 11331, 21075, 10159, 10154, or 10088 Cox (Remote Model UEI M720p01) Remote Codes 1610 Brighthouse (Remote “UEI” URC-11055) Remote Codes 1610, 1144, 1240, or 1331 Time Warner (Remote “UEI” URC-11055) Remote Codes 1610, 1144, 1240, or 1331 Time Warner (Remote "UEI" UR5L-8500L) Remote Code 432 Time Warner (Atlas OCAP 5) Remote Code 1610

Trying to program a universal remote can sometimes be a frustrating process. Successful programming of a universal remote depends on whether the universal remote manufacturer included our company’s information in the remote when it was assembled.

Then a cable company (ie., Comcast) or satellite provider (ie., Dish Network) orders their decoder box and universal remote control from a manufacturer (ie., Scientific Atlanta, Motorola, etc.), the decoder box manufacturer provides a list of all the possible remote controls this universal can duplicate. From that list the cable company or satellite selects which manufacture’s products to include on their new universal remote. Once those manufacturers names have been decided, they are placed on the universal remote and a numeric code is assigned. If they choose not to include our company on the universal remote, the universal remote may not access the Maxent screen.

If you cannot locate Maxent on the list provided to you by the universal remote provider, please try the following:

Through contact with various cable and satellite content providers we have developed a list of the most common numeric codes that are used with universal remotes.

Content Provider/Most commonly used code

Comcast: 1755
Comcast (ML-3251HLT Model): 0054
Insight: 1755
Direct TV: 11755
Dish Network: 742
Cable Vision: 165
Adelphia: 0156, 1755
Universal: 0762
One4All: 0036
Time Warner: 0230


We have identified other manufacturers of display products that have similar remote control information to ours. Depending on the universal remote you are using these manufacturers may work. Please use the documentation that accompanied your universal remote, and look up the following companies. Input the numeric code associate with that company.

Gateway
Sampo
Viewsonic
Magnavox
Phillips
Marantz
Pilot

If the universal remote you are trying to program contains a Code Search (the remote will scan through all the codes contained within the universal remote) function, we recommend that you try that procedure. It is possible that there may be another manufacturer code that may work with our monitor.

You may also want to try a Learning Remote from another manufacturer. This type of remote control can absorb or record the information coming directly out of the Maxent remote control. The learning remote then duplicates that information and acts like the Maxent Remote control. This type of remote can also record the signal coming from your other universal remotes in the same manner. In which case you can use this learning remote for your entire audio video system

please rate the chat session that got disconnected due to slow server if this helps.and if does not helps please reply for further help.

Trying to program a universal remote can sometimes be a frustrating process. Successful programming of a universal remote depends on whether the universal remote manufacturer included our company’s information in the remote when it was assembled.

Then a cable company (ie., Comcast) or satellite provider (ie., Dish Network) orders their decoder box and universal remote control from a manufacturer (ie., Scientific Atlanta, Motorola, etc.), the decoder box manufacturer provides a list of all the possible remote controls this universal can duplicate. From that list the cable company or satellite selects which manufacture’s products to include on their new universal remote. Once those manufacturers names have been decided, they are placed on the universal remote and a numeric code is assigned. If they choose not to include our company on the universal remote, the universal remote may not access the Maxent screen.

If you cannot locate Maxent on the list provided to you by the universal remote provider, please try the following:

Through contact with various cable and satellite content providers we have developed a list of the most common numeric codes that are used with universal remotes.

Content Provider/Most commonly used code

Comcast: 1755
Comcast (ML-3251HLT Model): 0054
Insight: 1755
Direct TV: 11755
Dish Network: 742
Cable Vision: 165
Adelphia: 0156, 1755
Universal: 0762
One4All: 0036
Time Warner: 0230


We have identified other manufacturers of display products that have similar remote control information to ours. Depending on the universal remote you are using these manufacturers may work. Please use the documentation that accompanied your universal remote, and look up the following companies. Input the numeric code associate with that company.

Gateway
Sampo
Viewsonic
Magnavox
Phillips
Marantz
Pilot

If the universal remote you are trying to program contains a Code Search (the remote will scan through all the codes contained within the universal remote) function, we recommend that you try that procedure. It is possible that there may be another manufacturer code that may work with our monitor.

You may also want to try a Learning Remote from another manufacturer. This type of remote control can absorb or record the information coming directly out of the Maxent remote control. The learning remote then duplicates that information and acts like the Maxent Remote control. This type of remote can also record the signal coming from your other universal remotes in the same manner. In which case you can use this learning remote for your entire audio video system

I've heard Logitech Harmony 680 learning remote works with Olevia 232 model; not sure if it works with your cable.