I need to know how to operate a Kenwood Z828

Request the diagram from Kenwood.

the code is in page 28, it also includes way to reset the unit if in case no code even the default did not work.

Kenwood kdc-x617 radio

http://inform3.kenwoodusa.com/manuals/kdcx617.pdf

hope this helps

You can use this manual to configure the AP60 router.

http://fs.airlive.com/manual/AirLive_AP60_Manual_Web.pdf

Ignition wire is NOT red
Battery wire is NOT yellow and
Ground wire is NOT black on the Z828 U4

Nobody is that stupid they couldn't have already figured it out if the colors were that obvious, hence they posted a query on this crappy site. The closes pinout I could find for this model is attached. You will likely have better luck doing a 12v test with a voltmeter.

Hi Juliet,
I'm trying to source the manual from Kenwood. If you provide me with your e-mail address I can pass it on to you, Fixya doesn't seem to have the facility to attach documents to solutions.

The attachments are available at these links:

http://www.4kenwood.co.uk/cgi-bin/search.pl?query=Kenwood%20KM230&brand=Kenwood&model=KM230&path=345550&model_pre=KM230&model_ref=440356&brand_ref=90

http://www.buyspares.co.uk/kenwood/kenwood-major/km230/catalogue.pl?shop=kenwood&path=345550&model_ref=440356

You can download the manual from the manufacturer's web site at
http://www.kenwoodusa.com/UserFiles/File/Global/Consumer/Manuals/KDCX889.pdf

http://www.kenwoodusa.com/Support/Car_Entertainment_Owners_Manuals/ You can download Kenwood Manuals from their Support Site. Provided it is the KDC-MP 205 try this: Press the SRC (source) button. Select TUNER. To the right and above the SRC button is the JOG wheal. By moving it to the right or left you scan for stations, when you find one that you want to store/save then press on the number of your choice from 1 to 6 and keep the button pressed down for 2 seconds, it might even beep. dreamsystems

http://www.docshare.com/doc/225162/KDC-MPV619-Manual

Here is the manual you requested.


I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

You can clear the code it you have the remote for it. No remote means no way to use the radio. If you know of a friend who has a Kenwood car stereo and the remote, you should be able to clear it yourself. It does not need to be the remote from that model of Kenwood. Most of the Kenwood remotes are the same for all the different models. I use the same remote for all models of Kenwoods that I get at my service center. You could always buy a remote, but if the problem is more than just clearing the code you would be wasting more money. I work at an authorized Kenwood service center and have over 18 years of experience with them. I have seen on rare occasions when the radio needs the code cleared, it has a problem with the microproccessor or the IC that is used for the security code. As I said, it is rare, but it can happen and may be safer to not spend anymore money on a new remote.

If you decide you want to buy a remote or you can borrow one from somebody, let me know and I will send you a link to a place you can buy one if needed, and then I will also post the procedure you need to use for clearing the code.

If the Kenwood dealer you took the radio to is a retail outlet and not a authorized Kenwood repair center, it is likely that they do not know the proper procedure for clearing the code. Kenwood does not tell their retail outlets how to do this procedure.

If you need me to post the procedure, please wait on rating me until I post for you.

Let me know how you want to do this.

Dave