What is the remote control code of a durabrand tv so that i can transfer over to a dish network remote control?

Hey the1andon480!

Follow the steps below to address your remote to the TV. I have also included some codes for Durabrand, and a link to find additional codes!

Codes: 220, 632, 189, 637
Link: http://www.mydish.com/support/apps/remotecodes.aspx

Addressing Remote to TV:

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.

If you have any other questions or need additional assistance, let me know!

Tommy Faust
DISH Social Media Representative

Please check if the following codes will help:
remote control codes:http://www.xdiv.com/remotes/

http://www.remotecodelist.com/remotes/rca/rca.htm

http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

http://remotes.com/

Hi L. Pruett, my name is Mike Houston of DISH Network and withthe Durabrand TV there are a couple of codes we do have for that TV. The threedigit codes will be 220 and 233 and what you will want to do is hold down the clearTV button until all the mode buttons light up. Press one of the three digitcodes I have sent press the # button and then press the Red TV button on theremote, the TV should have turned off and if not after trying the two 3 digitcodes I will send you a link for a Power Scan; http://www.dishnetwork.com/SupportSection/power-scan-instructions- Mike H.

Hi, my name is Cheri Torres with DISH Network CustomerService. We do have a few codes that you can try in order to get your DISHremote to control your Durabrand TV functions. I will list here for youour best codes for our most popular remotes and also the instructions foraddressing your remote to your TV. You will be able to find the model number ofyour remote on the back of the remote at the top. For the 3.0, 3.1, 3.2 and 3.4IR remotes the best codes for Durabrand TVs are 220 and 233. For the 5.0, 5.2,5.3, 5.4 and 20.0 IR remotes the codes are 220, 221and 523. For the 4.0, 4.4,6.0, 6.2, 6.3, 6.4 and 21.0 IR/UHF remotes the best codes are 233, 220 and 720.I hope you find these codes and instructions useful and if you have any furtherquestions or concerns feel free to email me at [email protected]. :)

Instructions for addressing remote to TV

1. Turn the Television On.
2. Press and Hold the TV Mode button until all the other mode lights (i.e. AUX, SAT etc.) light up.
3. Enter the three-digit code using the buttons on the number pad.
4. Press the pound(#) button. Note: The LED will flash three times.
5. Test functionality with the TV
6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

We would be happy to help you with getting your DISH Networkremote to control your Durabrand TV. Press and hold the TV button located on the top ofyour remote until all mode button back lights come on, then release. Usethe number buttons to enter the codes for your Durabrand TV; here some ofthe codes we currently have: 220, 233, 720, 834, 733, and 623. Press the pound (#)button to save the code in the remote. To check that the code works try several different functions on theremote to make sure it will properly operate the TV. Keep in mind that somecodes may not be compatible with your equipment. If this is the case, pleasetry the other codes listed for that device until you find one that iscompatible with your equipment.

We hope this helps and thank you for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

try 032 or 132 or 11034 or 694.
These have all worked on various remotes including Dish Network remotes for the Durabrand DWT 1304 color 13" TV. Look at the Funai Corp codes and the Orion codes. Sometimes they work, Funai Corp makes Durabrand.

Timrodlady

Durabrand Televisions 623, 695TRY THESE CODES THEY MIGHT WORK !!

Durabrand a private label tradename of Walmart, and is manufactured by Funai. Device codes include: 534, 541, 657, 661, 662, 677, 682, 694.

The code 694 worked for me when I programmed my Dish Network remote.

Durabrand tv's have three codes they are 623, 220, 221. one of those codes should fix your problem.

use the codes 520, 115, 916, 027. i just used them for my durabrand 13 in tv. i actually used 520! it works with the phillips magnavox universal remote.