My radio watch is off by 5 hours how do i fix it The minutes are correct the hour is wrong . It didn't change with daylight savings and we tried to change it and now it is off by 5 hours. please help

1. Press mode button (bottom button left side) until the time and day appears.
2. With time and day showing press and hold set button (bottom right side).
3. City codes will flash. Press start/stop to select city that represents your time zone.
4. Press mode daylight saving time setting flashes. press start/stop to obey or disregard radio signal for atomic time.
5. Press mode hour flashes. Press start/stop to change hour (include AM/PM)
Repeat the above step for the remaining values ( minute, seconds, month, day etc)
Press set an any step when finished.

Perhaps it has changed to daylight saving time if you accidentally pressed the mode button. Were you wearing the watch?

It sounds like your watch is on daylight saving time (DST) or it is set to the wrong time zone.

If you press the "Mode" button you will enter the settings menu and you should be able to change this by pressing one of the other buttons. Some experimenting will be needed.

I think you are changing from DST (daylight saving time) to local mean time.

Presumeably your problem is that the watch is not telling you the local time.

As the watch is radio controlled you can only change the time by choosing the location setting, so that the watch knows where you are.

Press the "mode" button to select the location abreviation and use other buttons to change to your local city.

When you have set the location, press the mode button to return to normal operation.

To change from 24 hour to 12 hour, you hold down the "Mode" button until it switches from 24 hour to 12 hour or vice versa. To change the time zone, you hold down the "Set" button until the time zone that you set it in flashes (like "LAX" on my watch). Then you press the "Receive/Start/Stop" button to choose the specified time zone you want. To set for daylight savings time ("DST" on the watch), after holding the "Set" button and having the time zone flash, you could press the "Mode" button. It will give you a few options for the daylight savings time (Auto, On, or Off). I chose the "On" option, which immediately changed for daylight savings time. If you manually want to change the time, you could hold down the "Set" button and keep pressing the "Mode" button until the time starts flashing on your watch, then pressing the "Receive/Start/Stop" button until you change it to the time that you want. You could also set the watch to beep or chime after pressing the set button if you wanted to know that piece. You hold down the "Set" button when you are done to get it to stop flashing. These instructions worked for my Timex T5G341 Universal Radio Control Watch. I hope this helps.

You could change between 12 and 24 hour by pressing the "Mode" button and the "Receive/Start/Stop" button at the same time. I still cannot figure out how to reset for Daylight Savings Time, though.

Hi,

Appreciate the direct "Ask Me".

Offhand, I would say yes to the battery replacement. Though watches are not within my immediate field. This would be based on your post "2-5 minutes behind". As to the "lost signal" after a reset, may I request that you post back the specific model number pls.

Hope this be of initial help/idea. Pls post back as requested, how things turned up or should you need additional information. Good luck and kind regards. Thank you for using FixYa.

Call tech support! That's why these people get paid. Sites like this wouldn't need to exist if they did their jobs correctly!

From the time telling mode press the set button the seconds will flash.

Press the mode button the hours will flash

Press the adjust button to change the hours

Press the mode button the minutes will flash

Press the adjust button to change the minutes

Press the mode button the month will flash

Press the adjust button to change the month

Press the mode button the date flashes

Press the adjust button to change the date

Press the mode button the day flashes

Press the adjust button to change the day

Press the set button when done.