Owners manual for kenmore power-mate # 116

closest here

Kenmore Central Vacuum System Owner's Manual ...

https://www.manualslib.com > manual > Kenmore-Cent...
Central Vacuum System. Central Vacuum System vacuum cleaner pdf manual download. ... Vacuum Cleaner KENMORE Sears 116 Owner's Manual. (24 pages).

Missing: #108.34544

Replacement Parts for Kenmore Central Vacuum

https://builtinvacuum.com > parts > kenmore
Expand to see list of supported models ... *Note: Kenmore Vacuum is a registered trademark of Sears, not M.D. Manufacturing, Inc. Products sold by M.D. ...
Missing: #108.34544

Kenmore Central Power Unit 108-34543 - Johnny Vac

https://www.johnnyvac.com > rp-central-vacuums > ke...
We settled an agreement with Sears Canada to rebuy all of their replacement parts for central vacuums, upright and canister vacuums cleaners of their home brand ...

Missing: #108.34544

..

Do you need the belt or the directions for changing the belt? Sears Parts Direct has the manual for the 116.58612790 here: http://www.searspartsdirect.com/partsdirect/part-model/Kenmore-Parts/Vacuum-Parts/user-manuals/manual-downloads/Model-11658612790/0582/0640500?modelNumber=11658612790&diagramPageId=&documentId= . The direct link to the manual is http://c.searspartsdirect.com/mmh/pd_download/lis_pdf/OWNM/L0802691.pdf . See pages 14-15 of the manual.

To replace the belt, you need to remove the light cover and then the light bulb. Press in the sides of the cover and lift to remove it. the bulb needs to be pushed in and then turned couter-clockwise. Remove the cover screws. Then flip over the Power Mate and use the flat blade screwdriver to release both tabs. Turn the Power Mate back to right side up and press on the handle quick release pedal and lower the swivel. Tilt the cover forward until it snaps free. Carefully, use your screwdriver to pop the brush supports free on both sides to remove the brush. Slide off the old belt. (If needed, slide off the brush supports and washers. Clean the brush before reassembling the unit. Then replace the brush supports and washers.) Push the belt on motor drive and then onto the brush sprocket. Push the brush supports back into place on the base. (Make sure that this isn't assembled upside down.) Then line up the front of the cover with the base and tilt the cover back into place. Press firmly until you hear both sides click into place. Replace the cover screws, light bulb and bulb cover.

The belt is available here: http://www.searspartsdirect.com/Kenmore-Vacuum-Parts/742024/0020/116/Model-11658612790/0582/0640500.html . This is part number 5285; it's the direct replacement for the original 742024 belt.

I hope this helps.

Cindy Wells

you should receive a owner manual if not then click on link below and click on the page to 18.
http://www.manualslib.com/manual/503828/Kenmore-116-31069.html?page=18#manual
or
Kenmore 116 31069 Use Care Manual Cleaning

good luck,

Just pulled mine apart and the bearing on the belt side is toast. In the past five years I have had several items fail due to less then optimal bearings. Including a transmission in a Vibe and a front load washing machine.

http://www.ehow.com/how_6174158_replace-kenmore-power_mate-vacuum-belt.html

First of all, thank you very much for choosing FIXYA today for your online technical support needs.


Here is a direct link to the ONLINE USER'S MANUAL for that model:


http://www.managemylife.com/mmh/lis_pdf/OWNM/L0412323.pdf


To view the Owner's Manual with Operating Instructions just use your mouse to click on the link, which is the underlined and blue highlighted text just above.


This will open a new web browser page automatically for you and allow you to view the information at the website indicated and the contents of the Owner's Manual.


You may need ADOBE READER installed on your computer to read PDF documents, although many computers already have this type of utility pre-installed.


You can download this free at WWW.ADOBE.COM if necessary. Click on the DOWNLOAD ADOBE READER button on right side of the ADOBE home page when you get there, then follow the onscreen instructions to install the software on your computer.


I truly hope that was helpful to you.


Good luck and take care.


Joe.

If unit beater has stopped working it is either the motor, the power connection to beater or the belt that powers the roller. Which is it?

See if you can download the manual from the mfg or google for it.

If you're talking about the belt that drives the brush in the power "head," you can replace it without the help of a manual. I did, and I'm certainly no mechanic. --Mike T

If you type in the model number on your searchbar, the website will be listed "after" all the sponored sites. Use the site that has YOUR manufacturers name in the url. Under the "support" section choose manuals and especially the term pdf. Thank you, Dana

http://geeksquad.fixya.com/ThreadView.aspx?prdid=109459&thid=699656
Model 116 hose clog?
Posted by rfrazelle on Jun 23, 2008
My old canister model 116 followed with numbers 2839580 marked Kenmore 3.9 with power-mate, worked fine until the bag got overly full. I have changed the bag, cleaned the filter, and removed a nasty hair/fur/dust clog :-p from the lower metal tube of the power mate. It now has very weak suction and won't pick up anything. I suspect a clog in the grey plastic flexible tubing attached to the canister but cannot get it apart. Advice?
RJ

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Kenmore 22313 Bagged Canister Vacuum. The best way to find a clog in an electric hose is to use a steel ball or a large marble to place inside the hose and to let it so threw as far as it can to determine where the hose clog is. Once you have determined where the hose clog is then you can use a small end of a broom handle of take an old wire coat hanger and place a hook on the end and try to pull the clog out of the electric hose – the electric hose is very expensive so try not to damage the hose in any way, shape or form. Or another way is that id you have another canister vacuum you can try to pull the clog apart by using two vacuums turned on and running. If you are successful then run the round marble or steel ball thru the hose again and the clog should be cleared.
http://www.sears.com/ Customer Service 1-800-4-MY-HOME 1-800-469-4663
Thanks, Don the Vac Man
Go Ahead. Use Us.