New hookup - warning light going on

Are you using pin feed or friction feed? Make sure the lever on the right is in the correct position.

goes through below link and download the driver

http://drivertube.net/?p=24,

for tvs dot matrix printer you can use epson printer driver which one comming with os ...add printer..>next...>select lican printer attached to this computer and uncheck the automatically detect ad install mu plug and play printer ..>next..> select LPT1 in use the following port optins...>next...>in manufacture colom select epson and printer colom select epson compatible 24 pin or 9 pin ( according to your printer ) ....>next ....>next.......>next ....>next....>finsh

could you please tell me why my copier isn't printing the copies dark enough-could it be the ink cartilage or another problem. I don't want to order the cartilage if it is another problem. It is an older copier-PC941

Make sur that the paper length is correct in the settings. With paper in the printer hold down the "SHIFT" button then press the "SEL/MENU" button. The "SEL" indicatr will light up. Now press the "PARK" button, a settings page will print. Select your paper length you require by going through the settings, if you press the "LF" button it wil take you through the different groups of settings, the "FF/LOAD" button wil take you through the different items in the groups and the "TEAR" button will change the settings on the different items. To save the new settings hold down the "SHIFT" button and press the "SEL/MENU" button.

The only thing that coould cause it to malfunction like this is a defective main board. Replacing the machine would be recommended as the board is rather expensive.

ebay has quite a few under $100

http://cgi.ebay.com/OKIDATA-OKI-Microline-320-Turbo-9-Pin-Printer-Working_W0QQitemZ120363664792QQcmdZViewItemQQptZCOMP_Printers?hash=item120363664792&_trksid=p3286.c0.m14&_trkparms=72%3A1205%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318%7C301%3A0%7C293%3A1%7C294%3A50

i think its time to update your printer. but if you want to keep it then maybe the cover is not put on the right way or it is blocking the process described. in these cases you can't really solve it.

just use the buttons, SHIFT+SEL(MENU) with the printer on and you will see the MENU light

Looks like you can get the non-T manual from the Oki site:

http://my.okidata.com/PP-ML320.nsf?opendatabase

We swapped out the printer for another one we had in the office that was working. The new printer also got the alarm light. From that we concluded that it was a bad serial card. We swapped the serial card from another printer, and the original printer started working perfectly. Now we just need to find out where we can purchase another serial card, as we have no more 'spares' around here.

What driver are you using, you should try the IBM Proprinter Driver.Hope this helps.
Dezzi