How do you connect audiovox IRHSCS wireless headphone to my tv

Instructions
1
Set up the transmitter. Wireless headphones rely on a transmitter that sends audio via infrared or radio waves to your headset. Use the digital audio output (coaxial or optical), RCA outputs (red and white) or headphone jack on your TV to connect the transmitter. The connection will depend upon which outputs are available on your TV and/or the transmitter.
2
Use an RCA-to-headphone adapter. If you don't have a headphone jack on your TV and the transmitter includes only a headphone connection, connect an RCA-to-female headphone connector. This will allow you to plug the wireless transmitter into the female headphone end and then hook the RCA ends into your television's audio outputs. You may also need a 3.5 mm (mini jack)-to-1/4-inch adapter if the headphone plug on the transmitter doesn't match the television jack.
Read more : http://www.ehow.com/how_4883556_use-wireless-headphones-tv.html
3
Set the transmitter on top of, or next to, the television. For infrared transmitters, you'll need a direct path between the headphones and the transmitter. Placing the transmitter on or near the TV will allow you to take advantage of the clear path you already have.
4
Plug in the transmitter and turn it on. Charge the headphones if necessary.
5
Turn on the headphones. Adjust the volume and settings and you're ready to watch TV.
Read more : http://www.ehow.com/how_4883556_use-wireless-headphones-tv.html

good luck

Normally the wireless headphones have a transmitter that send audio via wireless to the wireless headphones.
The transmitter needs to be plugged into the headphone outlet on the TV. This will switch off the speakers on the TV and sends the audio to the wireless headphones.

This web sight Has nothing to do with selling products. I would suggest contacting the manufacture of your headPhones.

I found the manual linked on the Amazon Product Page for the headsets. You can download it here:
http://www.amazon.com/Audiovox-Advent-Wireless-Headphones-Silver/dp/B00000J1GA

They are only for use with all Audiovox Video products which have built in IR transmitters.

yup.

http://www.wisegeek.com/what-are-infrared-headphones.htm

check the batteries in the headphones

you need a stand alone tv tuner with audio/video out

how to install:
1. connect tv antenna to tv tuner
2. connect tv tuner video out to tv
3. connect tv tuner audio out to your wireless headphone control tower.

Fixya... GOOD DAY!!!

redbeer, I have JW120 and could help. How do we get in contact? 88Reliant gmail