How do I get my Canon powershot s50 to display the date and time on the picture

In the next link, check Selecting Print Setting : DPUG1-EN.pdf (page 14 and next)

Good luck (remember to rate this answer).

The date stamp only works in the "Postcard" resolution. Press the "Func Set" button, scroll down to the bottom to select postcard resolution.

Once that is complete press the menu button. Select the "Camera" menu, then scroll down to the Date Time Stamp selection to turn it on.

Regards,
Jacob

The date and time (and a lot more) are stored with every picture in its EXIF metadata. Any photo viewing/editing program should be able to display this data. To print this data, please consult the documentation for whatever program you're using to print your pictures. Depending on the program and printer you may print the date on the image, in the margins, or on the back.

The date and time (and a lot more) are stored with every picture in its EXIF metadata. Any photo viewing/editing program should be able to display this data. To print this data, please consult the documentation for whatever program you're using to print your pictures. Depending on the program and printer you may print the date on the image, in the margins, or on the back.

The date and time (and a lot more) are stored with every picture in its EXIF metadata. Any photo viewing/editing program should be able to display this data. To print this data, please consult the documentation for whatever program you're using to print your pictures. Depending on the program and printer you may print the date on the image, in the margins, or on the back.

this can happen,gently tap the door(GENTLY) may loosen it works on my a70

go to the menu and set it up

you can play on the menu, JUST DO NOT FORMAT your card, as it will erases all your images.

The date and time (and a lot more) are stored with every picture in its EXIF metadata. Any photo viewing/editing program should be able to display this data. To print this data, please consult the documentation for whatever program you're using to print your pictures. Depending on the program and printer you may print the date on the image, in the margins, or on the back.

You have to select 'Postcard' for the image size -- on the same menu as L, M1, M2, M3, S, Postcard.

When you say it's displayed on the screen, do you mean while it's in playback mode, it's embedded there?

If not, you will have to put your resoltion in postcard mode and make sure in menu that your date or date/time stamp is turned on.

To get to your resolution settings, turn camera on to shooting mode, hit function/set button and arrow down to the bottom left corner where it will show your resolution (L,M,S, etc) and this is where you will find postcard mode.

This setting is the only one you can use date time stamp and will show up in prints, but only good for 4 x 6 prints, anything larger will not be good resolution, it will be pixelated because it's only enough quality for a small print.

Hope this helps!