RCA P61940 PROJECTION TV

Ur tv DM power supply board have dead leakages capacitors.U have tools,solders and soldering iron?U know how to do soldering.Tries websites like Tvrepairworld.com,Tvrepairkits.com buy a capacitors kit to replaced dead leakage capacitors to the DM power supply board.

It sounds like a convegence problem due to dust on the lenses. Clean the lenses with qtips and alcohol and then use auto convergence in the menu screen.

Contact a Technician to check your HV section of your TV, sometimes the heater on CRT have no supply.

The clear bulb located back left side needed to be replaced. Too much heat causes the bulb to burn out. Simple fix. One screw to open door to bulb compartment. Two screws to remove bulb assembly. Thank goodness for extended service warranty which paid for it. This is the second one in three years. At the price of $200 for bulb and $100 for trip and labor, this is not an inexpensive fix. Anyone purchasing a projection tv should get an extended warranty.

Bad FBT! flyback transfomer.

Try the menu under setup, find convergence, it realigns the colors,, you are suposed 2 do that periodicly,, or when u move the tv,, should help you ,, ive got that same tv,,

Hello yvettegarcia,

You can try, but the problem is it won't work, you can join the two with clear glue, but the seem will show up in your picture, very much the way a patched screen displays the repair seen when it has been repaired. I would suggest getting in contact with RCA and ordering a new screen.

I hope this helps,

Thank you,

Shuttle83

If you have a VCR or a DVD player, connect the red, white and yellow cables to the TV and select video 1 input on the TV.
Let me know if you require further assistance.

I've anwsered on your premium post.
Try using the audio/video inputs to bypass the RF converter (tuner).

Get a schematic and trouble shoot the main power supply if you have solid state experience. If you dont , PLEASE call a trained TV tech to assist you in this repair.