Vision Quest 32inch PVQ-32VGB password not working... locked out

Here are some great source where will will get any kinds of Gaming Consoles Solution

» Sony Playstation 3 (PS3) Console
» Microsoft Xbox 360 Console
» Nintendo Wii Console
» Sony PlayStation Portable (PSP) ...
» Nintendo DS Lite Console
» Sony PlayStation 2 (PS2) Console

Number of vote for this solution:21

How to unblock a renoir vision quest tv when it says program blocked?

I had same problem, called visionquest tech support for how to reset the tv:

Using the remote, press source then 2580.
A menu should appear, go to other settings then choose restore default. Select yes.

It worked for me - hope it does for you too!

Trying the same thing. 10650 lets me change channels and control volume but, can't turn it on/off!!!

I have a Van gogh 32" PVQ-32VGB Plasma Tv by Vision Quest. The password which was the manufacturer password was 0000 and i went to enter it and it was incorrect. Now i can get into anything!!! What can i do?

The Innovage Jumbo remote control manual does not list any TV's by the manufacturer Vision Quest, but that does not mean your TV is not compatible with another brand's control codes. I recommend using the auto-search function to see if any of the remote's TV codes work with your set.

To have the remote try each TV code it knows one at a time, follow these steps:

1. Turn on your TV.
2. Press and hold the CODE SEARCH button for at least 3 seconds until the red LED lights up and stays lit.
3. Press the TV button on the remote so that the LED blinks once and then remains solid red.
4. Press the ON/OFF button slowly and repeatedly until the TV turns off. The LED will blink once each time you press the ON/OFF button.
   
5. Once the TV turns off, press the ENTER button to store the code and the LED will turn off.

I hope that helps.

10030 worked for us - a NEC code

Universal remotes don't like combo units.If your original reomte worked before you lost it you are going to have to buy the original remote to solve your problem.

I'm pretty sure that your unit uses the 3V cr123 Lithium battery. You can get it at RadioShack. You can always take it down to radioshack and pretty quick you will find the correct batt.for the unit. Do not use rechargeable batts!

your tv is locked!
If you have a blank screen with a red key on the bottom left, simply press the (function or F) button and the mute button at the same time. This will unlock the screen and allow you to view the channel as desired. • If your TV asks for a 4-digit code or password please enter 3308 or 6688 to unlock the screen or reset any preset rating levels. • If you have a GT2011J or GT2011S Television, hold the (Display) button for 10 seconds, it will unlock the screen. If password or code is requested, try 3308 or 6688.
http://vchip.atspace.com