I have just purchased the above Zanussi model and have been told by the electrician that it looks like it needs female spade connectors to connect the new cable to the terminal box on the rear of the oven.
He says that he is quite reluctant to use these connections as they were not supplied in the box when delivered and he has never had to connect an oven using spade/crimp connection before.
As there is no clear instructions with my appliance, he says that I should contact someone for advice and find out which size/colour spade connectors he should use he will be willing to install it.
Rosie
I've got the same issue, looking at them it's either the blue or yellow ones you want, the manual states that it should be installed with 2.5mm flex cable if going to a plug and 2.5mm twin and earth cable if your going to an electrical outlet.
I turned of the power in kitchen when i was away for a few weeks, and now i need to get the oven working again.
723 views
Usually answered in minutes!
I have bought a Zanussi ZBQ 865 built in oven with the same terminal block . How on earth are you supposed to fit 2.5 mm cable to spade connectors small enough to fit the terminal block?
×