I didnt get a manual and dont know how to install actiontech gt wireless router

follow the installation guide/manual.
Download one if you dont have it, you may even find youtube videos to show you

are you sure your putting the right security wireless network key? thats the problem. check your network name and security wireless network.. thank,,

Well use a browser http://192.168.2.1 and log on with the word admin as password & logon. This will open up the setup for your router. Also go here to get your manual. http://www.retrevo.com/support/Belkin-N150-Wireless-Routers-manual/id/23537ag620/t/2/

You need to login into your router and check the wireless security settings. You probably have a WEP key setup.
you'll need it's ip address. refer to your manual. if you dont have that, go to the manufacuters website and read it there.

Make sure that the computer is connected properly. Check if the pc is grabbing a valid IP from the router and if not assign a static IP.

http://www.it.hiof.no/datakom/lab/di514_QIG_103.pdf


go for this web site you go the your anwers

Actiontech routers should use the username/password combination of admin // password. If those aren't working, you or someone else, may have changed the default username/password of the router. In that case, you either need to figure out what was set or use the little red button on the back of the router to reset the router to factory defaults. Once that's accomplished, you should be able to use the password combo above.

You may be choosing the wrong encryption method. For instance your entering your wireless key (WEP) and you have it set on (PSA, WPA). Make sure those settings match. Also you may have an IP conflict which is resolved by setting up a static ip. If the encryption methods match and you need help with a static IP let me know

Well what everybody really doesnt know is that if Qwest provided you with a modem named Actiontech that modem has the same ip address of router so just change routers ip address to 172.16.0.1 and subnet mask to 255.255.0.0 and the problem should be solved.Im a product specialist for dlink.

I have the same problem