At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You can find the manual here:
http://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=498#dl
The board is usually marked, also, although it is very tough to read the small print.
Get the user manual here: User Guide Chapter 2 Page 17. The plugs just fit on to little pins in the bottom corner of the board.
If you connect them and hard drive indicator light on the front of the case does not come on then you need to swap the 2 connectors around. It's an led which has to be connected the correct way to work. Same goes for the power led on the front of the case.
Open the cabinet in such a way that all the parts should be viewed to you. See carefully for the pins which will be there in the motherboard, beside or above or below it will be written ed like HDD LED, PWR LED etc. On the cable end also it will be mentioned same, match the things connect & work.
don't you have the book for the motherbd? Most motherboards tell you right on them wat connection goes where. look for them they should be in close vicinity of each other Usually.... HDD-Harddrive connection./.RST - Reset /pwr-- to switch ....etc....
×