I have gotten the F7 Error Code. I can use the oven for a short amount of time and then the error code comes up. I can turn off the power to the unit and it resets only to happen again. Please, any suggestions
I'm not sure what your problem is, but I have the same one. My stainless steel glass top model ?? is beeping all the time with error f7 on all the 4 tem control readouts. I'm guessing this is your problem as well. By turning the temp knobs it will stop, but sometimes restarts later for no reason. Other sites mention a ribbon cable on the touch controls (if yours has it, mine does ) that must be cleaned with rubbing alcohol. You turn off the power, and after unlocking the cable you clean the contacts with an easer and a q-tip w/rubbing alcohol. I don't know if this works but I might try it as the beeping is driving me crazy! The service techs will try and sell you about $450 in parts to fix the problem. This problem apparently has plagued these units for almost 10 years. Seems heat makes the cable get shorts at the contacts.
I HAVE NOT TRIED THIS YET so beware, but I had a short in my microwave and the site helped me fix a $500 control board for about 15 cents ( jumped a short on the board with a small wire!) Hope you get your problem fixed.
2,794 views
Usually answered in minutes!
i am geting an f7 error code on my wall oven. I want to know how to stop the annoying beeping?
same stupid beeping... and F7.. pleaelpse h
f7 and EA are flashing on my oven. My oven won't work? We've ahd it only 2 years? help!!! - Oven less in San Diego
keep getting f7 error code. oven shuts offs. how can i fix this?
I also have the same problem with the F7 flashing, but at times I have cannot use any of the buttons on the oven. Nothing works, no matter what button you press. We tried turning off the breaker like it says in the manual and that helped for a while. We had someone come and look at it and when we turned the breaker back on everything miraculously was working. I was charged $50 for a call out fee and then the next day nothing works again. We have been told this would be $500 and $750 to replace the control panel. The oven is eight years old and to be honest is not used as much as most households. Any suggestions would be appreciated. Thank you.
We have a 5 year old GE Profile gas range and we get the same F7 Error code repeatedly. Lately, it occurs more frequently than before. We unplug the range for 5 minutes per the troubleshooting instructions in the manual, but it still does not respond correctly. In fact it appears only to respond after being unplugged overnight...But of course it doesn't last.. We are told the service call is $80, plus an expected repair/replacement cost of some $300-$400.
It appears to occur mostly when we use the oven...Perhaps it's an electronic component that is sensitive to the oven's heat?
×