Reinstall software needed for Olympus VN-21000PC, no CDRom

I hope I can help!

This should be everything you need. Link

I hope that helps!

Contact Olympus at 1-888-553-4448.

Are your friends PC and your PC running the same operating system????
If you need software downloads for your PC go to www.olympusamerica.com

Hello,

yes, it is possible. You will connect the earphone jack from your voice recorder to Mic of your laptop. Then you will be needing a wave software on your laptop, download the wave software from the internet, open the wave file, then press play on your voice recorder and the minutes will be recorded into your laptop as a wave files.

But the easiest method of tranferring the minutes is by using the usb cable of your OLYMPUS VN-480 PC voice recorder. If you don't have it you can purchase it, then connect it from your OLYMPUS VN-480 PC voice recorder to the usb of your computer and it will be read like a flash drive.

After that, go to my computer and you will see a drive representing the OLYMPUS VN-480 PC voice recorder, open the drive and you will see your minutes, then simply create a folder on your computer, and copy, paste the minutes into the created folder. And the would be all.

God luck.

http://www.olympusamerica.com/cpg_section/cpg_support_downloads.asp?id=1175

Is your digital wave player an outdated version?If so, you may have to update it you can get it from the Olympus site..I downloaded the original software from: http://www.mywma.org/vn2100pc.html then update it from : http://www.olympus-europa.com/consumer/2590_software.cfm

Hope this helps =)

u can download here

http://members.driverguide.com/driver/detail.php?driverid=1245884

copy them to my documents/digital wave player/message/folder a

they will show up there

http://www.zylomed.com/download/olympusdrvs/
Then go to Olympus to download the Vista update.
This will help.

I figured it out.

My VN-960 wouldn't recognize because windows didn't have a driver for it.

With the Install CD still in the drive, Go to the control panel, New Hardware, then wait for it to finish searching. Click on My Hardware is connected, then choos the Digital Wave Recorder, and then find driver. It should install the driver and Work now!