How do I get maximum recording time from a Olympus J300 Pearlcorder dictaphone?

If the manual you would like to download is not shown above, or if you would like an Olympus representative to assist you, please email at [email protected].

Manuals can be downloaded at www.olympusamerica.com

by switching the speed from 2.4 to 1.2 on th recorder

Hello your Spring goes on bottom rigth when you open the cassette door is in the inside like a small round one if you have problems try to put it back you can send it for service to
Send an email to [email protected] or call (800) 644-9525. Please indicate model, serial and detailed description of problem

Hi,

You could download the same from :-

http://www.olympusamerica.com/cpg_section/cpg_support_product.asp?id=529

Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Hello make sure the switch that is close to the power jack is on the off position sound like you have VCV on or VOX thats voice activate recording that is only record when is person talking

put in 2 AAA batts and insert a tape, then push record to record, and expirament!

VCVA
set it to VCVA on the left side and push record, will only record when detects noise

Hello check the switch for VOX needs to be in the middle position make sure is not on F.Play
If the speed doesn’t change is your main motor

You can download a manual from the manufacturer's web site at http://www.olympusamerica.com/cpg_section/cpg_support_product.asp?id=529

Just put the switch on the VOX position and used the volume control to set the gain for Voice activation