I need a owner's manual for a early 80's Troy-bilt Horse tiller It hasn't been used for a couple of years and we can't get it started. Want to make sure I have the correct spark plug and the correct fuel and etc. for running it. It's been very reliable, and I want to put a garden in. I have someone who helps me but he doesn't know about repair or maintenance of the tiller. THIS IS NOT A PONY BUT A HORSE. THIS WAS NOT A CHOICE ON YOUR STUPID PRODUCT LIST

without a proper model number it is guess work, but either the drive belt has snapped, or if the right wheel drive the left wheel, there may be a half moon key way or a shear pin. General help here, followed by parts suppliers

https://www.google.com/search?q=Troy+bilt+horse+tiller+right+wheel+turns%252C+but+left+wheel+doesn't+turn

Garden Tiller Parts - Troy-Bilt

https://www.troybilt.ca > shop-by-machine-type > garde...
Find the tiller parts, including blades, belts, tines, seals and replacement part kits, that fit your Troy-Bilt outdoor power equipment. When you need garden ...

Troy Bilt Horse Parts Lookup by Model - Jacks Small Engines

https://www.jackssmallengines.com > ... > Tillers
Troy Bilt Horse Exploded View parts lookup by model. Complete exploded views of all the major manufacturers. It is EASY and FREE.
‎Horse i 7hp roto tiller (s/n 1001... · ‎8HP Electric PTO Horse Tiller · ‎2308 Horse III

Garden Tiller and Cultivator Parts ' Troy-Bilt US

https://www.troybilt.com > en_US > garden-tiller-parts
Find the tiller parts, including blades, belts, tines, seals and replacement part kits, that fit your Troy-Bilt outdoor power equipment.
Rating: 4.8 · ‎88 reviews

Troy Bilt Horse Tiller Parts

https://tb.shankslawn.com > troy-bilt-horse-tiller-parts
Troy-Bilt Horse Tiller Part Search. Search the part you're looking for by part number or model below. Troy-Bilt Part Number:.

produtools.com

http://www.hammerwall.com/Manuals/Troy-Bilt/Description/21A682J766/Troy-Bilt%208%20HP%20Rear%20Tine%20Tiller%208%20HP%20680%20Series%20Briggs%20and%20Stratton%20Engine%20Manual/275092/

See if this site has the manual you are looking for.
http://lawnandgarden.manualsonline.com/manuals/mfg/troybilt/troybilt_tiller_product_list.html

Hope this helps!
Codebynite

http://www.mtdparts.com/webapp/wcs/stores/servlet/OperatorManualView?storeId=10101&catalogId=19502&langId=-1

Go to the above website and put in your model and serial number. If it is a Horse tiller just type in Horse and your serial number and you can download a copy of your operator manual. If it is the Horse model it was built between 1/1/80 and 7/1/80. i believe you have a Horse II four speed model that will just have one drive belt the older Horse I tillers were two speed with two belts.
Most any good tire shop can supply tires for your tiller or you can order them online and take then to a shop to mount for you. If your tires are not real bad they can just put tubes in them so they will hold air. Almost all parts are available through MTD who owns the Troy Bilt name now or through many sites online.

Good Luck,

Frank

If you email me at [email protected] I have a couple of Econo-Horse manuals that I downloaded that I can email to you. They don't really have a clutch just belts and pulleys so its probably just needing a new belt or a belt tension adjustment. I have a Econo-Horse tiller and it is a nice machine I think mine is about the same age as yours.

Good Luck,

Frank

From the #HH60 I think it is a 6 horse power,tecumse engin whith a horizontal crank shaft.

http://manuals.mtdproducts.com/mtd/Public.do

Go to this website and type in Horse for your model number.Just put thenumber 1 in for your serial number and it will bring up several horse tiller manuals. If yours is a 1976 then it should be
a Horse I model. This should be a two speed tiller and have two drive belts.

Frank

The serial number is stamped on the upper right hand side of the gear housing. It is on a flat spot just above the wheel shaft. If it is a newer model it will be on a white sticker on top of the gear housing plate. If it has the T handle it is probably an older 1980's model. If you find the six digit number I can give you the year it was made.

Frank

You likely have a clutch problem, never saw one that a simple adjustment would fix. I'd take off the tiller (there are two bolts that hold the tiller portion to the transmission, and check to make sure the clutch is sliding in and out. My hunch is either the lever is loose on the shaft or the allen-head little bolt that they use to shift the clutch has come out. Be sure to grease the clutch while you're in there.

This should be covered in your owners manual. Shame on them if they didn't mention this.