Question about Zanussi 23 in. ZDT6252 Built-in Dishwasher

2 Answers

Wash but doesnot drain the water - Zanussi 23 in. ZDT6252 Built-in Dishwasher

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Depending on the machine. If it has a re-circ pump motor, put simply cleans the dishes, the drains the dishes.
I would suggest replace the plastic impeller assembly.
Replaced mine, for 25 quid, pumping the waste like a train !!!

Posted on Mar 02, 2010

Ad

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Zanussi Master
  • 3,489 Answers

Hi it sounds like a blocked water pump

Posted on Feb 17, 2010

Ad

1 Suggested Answer

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Samsung vrt stopped and said SE? Went to start over and rinse and it just stops during rinse with water still in it.what do I do


The'5E'Error is displayed when thewater is not drainingproperly from the Washing Machine. If the water doesnot drain in 15 minutes, a buzzer will sound , and the remaining time indicator will show '5E' Error.

You can perform following steps to resolve the issue :
? Clean the debris filter.
? Make sure the drain hose is not clogged.To make it unclogged, Detach the drain hose from washing machine. Attach the spray nozzle to the end of the hose. Aim the sprayer into the clogged washer hose and spray water kinetically down the hose. Continue spraying until the hose is no longer clogged.
? Make sure the drain hose is not frozen.
? Make sure the drain hose is installed correctly.

Dec 15, 2017 | Samsung Washing Machines

1 Answer

The washer will not go into spin mode or drain the water


see this cause:
t spins, but doesn't pump
drain line is clogged,remove the large hose that connect to pump to bottom of outer tub remove the cloth with pliers, propeller pump damaged replace
It doesn't spin or pump
frozen pump pulley replace pump,check manual, if doesnot replace it
It pumps, but the water returns
drain hose if reache more 4inches, cut ot the remain.if lower install air/gap siphon break assembly.
God bless you

6_20_2012_8_51_16_am.gif6_20_2012_8_51_29_am.gif

Jun 19, 2012 | Washing Machines

1 Answer

My machine is not draining and I took some things out of the drain still doesnot drain


Hi,

Problems with a washing machine not spinning or not draining are often inter related..

If you are having a problem with your top load washer then check out this tip...

Washing Machine does not Pump or Spin


If you are having problems with your front load washing machine then checkout this tip...

Front Load Washing machine not draining and or not spinning


heatman101

Jan 05, 2011 | Kenmore 94702 Front Load Stacked Washer /...

1 Answer

It spins but the water doesnot come out


Hi,

Problems with a washing machine not spinning or not draining are often interrelated..

If you are having a problem with your top load washer then check out thistip...

Washing Machine does not Pump or Spin


If you are having problems with your front load washing machine then checkoutthis tip...

Front Load Washing machine not draining and or not spinning


heatman101

Oct 10, 2010 | Washing Machines

1 Answer

I got kenmore 70 series. it doesnot spin but it


You have a bad lid switch . This is the piece , the lid actuator piece , goes down onto , in the hole on the top . Try putting a screwdriver into the hole , to activate the switch , to drain the water and to spin the clothes dry enough to remove , until the switch can be replaced .

Nov 26, 2009 | Kenmore Washing Machines

2 Answers

Machine doesnot agitate or drain once filled with water


it sounds like a bad lid switch if it will not drain or spin,the switch controls that-mike

Apr 24, 2009 | Washing Machines

1 Answer

Doesnot stop filling water


To javed_iqb904, does the drum actually fill or does it seem like that water is draining out as it's filling?


To neonllama19, if it fills with the tap on and the machine off, it sounds like a defective water valve. If it never stopped filling it sounds like a defective pressure switch or hose to the pressure switch is loose or diconnected.

Jan 08, 2009 | Frigidaire GLTF1670A Front Load Washer

Not finding what you are looking for?
Zanussi 23 in. ZDT6252 Built-in Dishwasher Logo

Related Topics:

210 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Dishwashers Experts

Paul Carew

Level 3 Expert

3489 Answers

Renee Knafel-Bullock
Renee Knafel-Bullock

Level 2 Expert

353 Answers

ray gallant

Level 3 Expert

66470 Answers

Are you a Zanussi Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...