My uniden cordless phone says vm on the screen. What does that mean?

SOURCE: Need an owner's manual for Uniden EZ1996 Cordless Phone

Here it is.
http://www.uniden.com/pdf/EZI996om.pdf

SOURCE: UNIDEN ELITE 9035 + 1 (WHITE) CORDLESS PHONE INSTRUCTION MANUAL DOWNLOAD

Try here:

http://www.uniden.co.nz/RESOURCES_MAIN/pdfs/ELITE_9035_OM%20Final.pdf

This is the manual from the Uniden NZ site.

SOURCE: uniden 5.8Ghz phone.

You need to reset the main base unit. Unplug the power from the back of the base. While the power is disconnected, press and hold the delete key while reconnecting the power. Wait for a long beep tone. When the display shows 88 or P, press play button one time. If you have a phone without an answering machine, disconnect the power from the back of the base, press and hold find hs button while reconnecting power.

george peters

• 860 Answers
• Posted on Sep 20, 2009

SOURCE: I have a uniden cordless phone model tru9480-3

With the phone in standby, press and hold [dnd] on the base. You will hear a confirmation tone and the [dnd] LED will go out.

Testimonial: "Thanks IT Worked"

SOURCE: My phone screen says check

First be sure you have dial tone at the jack. Use a corded phone to do this with. If you do have dial tone then be sure you have ac at the outlet that the transformer is plugged in to. If there is no dial tone at the jack...go to your interface box outside and check for dial tone there....if none call the phone company. If you do have dial tone then you need to check your wires to the jack...or have the phone company do it for you. If you don't have ac at the outlet....check your breaker box or have an electrician check for you.