I am looking for replacement LCD parts for my westinghouse TV. when the tv is switched on, it flashes the blue screen and then goes black. you can hear the tv volume but no picture, no numbers/menu display. I took the back off
and dug in a bit and found that the outside 2 terminals of the power cable-to-control panel connector are burnt. the female pins are burned, and the male
side are discolored at the base, by solider connection. Im not sure what came first, a faulty terminal or a faulty part but either way, i need parts. i suspect the control panel has been compromised, not sure what else. i would love a source for parts or part list.
thank you for any help.
greg
Tv comes on, blue light blinks, no volume, and no picture
Check this LINK to see if they have any available parts.
SOURCE: westinghouse lcd tv parts
can I have your LCD SCREEN? Mine is cracked and I sure could use a new one, or used if thats the case =)
622 views
Usually answered in minutes!
we had our 32" westinghouse LCD (SK32H240S) for 1 1/2 yrs...a couple
months ago it started going into a blue screen with vertical/horizontal
lines, sometimes just a blank black screen. The sound would stay on
with no problems. We took it to the HDTV repair shop and they said it
was the MAIN SIGNAL BOARD (aka control board?). They quoted the part to
cost us about $300 + labor, it was also on backorder for 2 mths, wasn't
going to be in until end of Oct! We ended up just buying a brand new
sharp
TV, but now trying to sell this one, we just need to know where we can
find this part new/used so we can provide some info to the new owners
and then THEY can fix it!
×