Need to know if I can record from dvd to vcr on a magnavox ZV420MWB vcr/dvd combo

Question edited for FULL 'make model (what it is)'.
Question moved the correct category..

Here is your manual

https://www.manualslib.com/manual/413296/Magnavox-Zv420mw8-Dvdr-Vcr-Combo.html#manual

https://www.google.com/search?q=Magnavox+ZV420MW8

..

If you buy the combo in the US, its region 1 and can play all the other regions.

In my research, I learned about finalizing the DVD, which was a new concept to me. I looked that process up in the manual and it did the trick.

alot of times when the video cord gets pinched it will go to black and white you just have to replace it if that dont work. then its one of the machines.

For my direct tv remote, 20675 worked for me :) magnavox zv427mg9 combo vcr, dvd

No, this is only a VCR.DVD combo you only can record from the DVD to tape not vice versa! I have not seen a recorder on the market for end users that is a combo but I may be wrong on that but I do know this is just a reader on the DVD. Hence dual player!!!



Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

ZNREL, I've done this with Dish Pro before. Setup the Dish remote to control the Mag combo in the VCR position. Press the SAT button and select the guide. Go to the program in the guide and select it. The "record this program" routine should pop up, set it up. Here's the key, make sure the Dish remote has the VCR button selected and that the remote is placed where it can "see" the Mag combo. At the set time, the Dish remote will change the DishPro to the proper channel and then issue s "record" command via infrared to the Mag combo to start recording. DishNet has all of the device codes to their remotes downloadable from their site.

I have a Magnavox zv457mg9 DVD&VCR combo ,and the vcr records for a short period(10minutes) and then cuts off. This happens each time I try to record on the VCR. Any suggestions??

I purchased a Magnavox MWD7006 and need to have it play in Db5.1 KOSS Entertainment system; thus far only plays in stereo; anyone know what I'm missing? I'm using a S-Video cable.

I need codes for my Universal Philips Magnavox remote for a Sanyodvd vcr combo ?