Zanussi ZWF1430W Front Load Washer Logo
Posted on Feb 24, 2008
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Zanussi zwf 1432 w washing machine

I have the above machine and the start button is continually flashing when I am trying to start a programme because of this the machine wont start please help

Answer This Question
  • 2 more comments 
  • Anonymous Jan 10, 2009

    i have the same problem start button flashes 3 times but wont start or let me change programme, no matter what button i press it flashes 3 times then does nothing, can ayone help me please?

  • Anonymous Jan 10, 2009

    my zanussi zwf 1432 w washing machine wont start, it lights up but flashes 3 times then does nothing, tried pressing all buttons but same thing happens flashes 3 times then nothing,......................... please help ty

  • roberttokar Apr 28, 2009

    hi there i have zanusi zwf 1432w and the machine wont spine for eg. if i put washing program wash,rinse,spin it washes rinse but not spin. i have tryed to clean the pies and the drain plus filter but the problem is still there. then i also tried to reverse the drum manualy but nothing happend please can anyone help

  • goozy May 20, 2009

    I have the same problem with the machine, when i press any buttons it beeps and flasses 3 times, does anyone have any idea's. is this a common fault with this machine?

×

4 Answers

Anonymous

Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.
Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on Dec 21, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.
Mayor:

An expert whose answer got voted for 2 times.

Joined: Dec 21, 2009
Answers
1
Questions
0
Helped
3786
Points
6

Pcb as the signs were that the pcb was stuck in a programme and unable to change. Anyway, long story short, to fix it:
Take the lid off the washing machine (2 screws at the back) *unplug first
Locate the pcb, unscrew and lift above the washing machine with all wires in tact.
Locate the wires that are coming out of the back of the "program" board, it should be 2 blue wires.
Follow these back to the pcb and unplug
plug in washing machine
Turn on washing machine
Only the on/off light should come on
Whilst on, and being careful, plug back in the wires you unplugged
VOILA, fixed washing machine!!

Right, have to go, got a weeks worth of washing to do!!!!

Anonymous

Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.

  • Contributor 2 Answers
  • Posted on Jun 10, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.

Joined: Jun 10, 2010
Answers
2
Questions
0
Helped
3908
Points
4

My Zunussi ZWF1432w has all the lights flashing and bleeping, including the orange filter light, I have removed the filter at the front of the machine, cleaned it, put it back, same problem, so I have done the thing with the blue wires, nothing, just the same lights flashing (including the orange light), is there another filter ??
HELP!!!

Ad

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Sep 12, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Sep 12, 2009
Answers
1
Questions
0
Helped
3786
Points
1

I've answered the 3 flashes & 3 beeps problem here

http://www.howtomendit.com/answers.php?id=266114

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points
Hot-Shot:

An expert who has answered 20 questions.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.

  • Expert 96 Answers
  • Posted on Mar 07, 2008
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points
Hot-Shot:

An expert who has answered 20 questions.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.

Joined: Feb 15, 2008
Answers
96
Questions
1
Helped
53713
Points
176

Normally when the light above the Start button is flashing it means that the machine is in Pause mode. Then you have to hit the button again to get it to start. If it still doesn't work try the Reset button also.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Zanussi machine washer. ZWF 1000M The wash button is red. The rinse button, spin button, and power botton is flashing red. This happened several minutes after tuning oN the 30 min cycle.
According to your description it is a failure E9- motor is not working. The temperature rises too high. The motor cut off for heat safeguard (Harness failure, PCB failure).

Dado
Read full answer
Apr 06, 2016 • Zanussi Washing Machines
0helpful
1answer

My zanussi zwf 14080g isn't working. The start/pause button is contantly flashing and no matter what I do, it won't start. Please help. Thank you
Sounds like new door interlock switch is needed
Read full answer
Dec 06, 2013 • Indesit W 123 Front Load Washer
0helpful
1answer

Zanussi washing machine ZWF 14070 error . It wont start.
Take a look at this page.
Read full answer
Nov 02, 2012 • Washing Machines
0helpful
1answer

Zanussi zwf 1437 starts cycle then stops midway. door light flashes. have to turn off machine at main switch to reset
This is a door lock fault, the lock is working initially but as the machine operates it fails, the only way to fix it is to replace the door lock assembly
Read full answer
Mar 07, 2012 • Zanussi Washing Machines
1helpful
1answer

My Zanussi ZWF 1221 W will not rinse. Any ideas?
my zanuzzi 1500 will not rinse

Read full answer
Jun 06, 2009 • Zanussi FJS1225W Front Load Washer
0helpful
1answer

Zanussi ZWF 1631W
Try to pull out the power-cable from the contact. Wait for at least 30 seconds then reconect it again.
Sometimes that can help but not always. If that dosent help you need to let a profesional repairshop fix your machine.

Good luck
Read full answer
Nov 21, 2008 • Zanussi ZJ1217 Front Load Washer
1helpful
1answer

Zanussi zwf 1632 w
hi follow this Step 1: Unplug the washer. To access the timer, remove the control knobs and the panel that covers the controls. This may be a front panel, or access may be through a panel at the back of the unit. Carefully examine the wires that connect the timer to the other parts of the washer. If the wires are loose or disconnected, try pushing them into position; they usually fit into their terminals like plugs. Use long-nosed pliers to avoid breaking the wire connections -- never pull a wire by handStep 2: To test the timer, use a VOM set to the RX1 scale. Disconnect the power leads to the timer and clip one probe of the VOM to each lead. The VOM should read zero if the timer is working. Since the timer is a multiple switch, turn it through its cycle and test each pair of terminals in turn. The meter should read zero at all of these points. If one or more readings are above zero, the timer is faulty and should be replaced.
Step 3: To replace the timer, unscrew and disconnect the old one. Install a new timer made specifically for the washing machine. If there are many wires on the timer, have a helper hold the new timer next to the old one as you work. Disconnect the old wires one at a time, connecting each corresponding new wire as you work, to make sure the connections are properly made. Or, draw a diagram showing the connections before removing the old timer. After all the wires are connected, check the connections again for correctness and screw the timer assembly into place.
 thank u.......................
Read full answer
Sep 12, 2008 • Zanussi ZWF1430W Front Load Washer
0helpful
3answers

Zanussi zwf 1432 front loader
check the filter down on the right and cleane it
Read full answer
May 28, 2008 • Zanussi ZWF1430W Front Load Washer
0helpful
2answers

Zanussi ZWF 1432 washing machine
because theres more water it takes a lot longer to heat.
Read full answer
May 04, 2008 • Zanussi ZWF1430W Front Load Washer
0helpful
1answer

Zanussi wj1054 front load
Check the water level pressure chamber for a partial blockage, this can cause all sorts of problems.
Read full answer
Apr 07, 2008 • Zanussi F1045W Front Load Washer
Not finding what you are looking for?

View Most Popular

ZWF1430W Front Load Washer

  • Washing Machines

Related Question

Zanussi machine washer. ZWF 1000M The wash button is red. The rinse button, spin button, and power botton is flashing red. This happened several minutes after tuning oN the 30 min cycle.

  • Zanussi Washing Machines

Related Topics

3,796 views

Ask a Question

Usually answered in minutes!

Popular Questions

I left the transit bolts in our

Zanussi ZWF12070 Front Load Washer

Zanussi Electrolux ZWF 1430 W (E20 error)

Zanussi ZWF1430W Front Load Washer

Zanussi zwf1430s error codes - E40 / E41 & ELE

Zanussi ZWF1430W Front Load Washer

E10 code on a zanussi jet system washer

Zanussi WJS1265W Front Load...

Start/Pause light flashing but machine won't start

Zanussi FLE1416W Front Load Washer

Top Zanussi Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Kolbrun...

Level 3 Expert

1228 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. ZWF1430W Front Load Washer Manual

ZWF1430W Front Load...

Loading...