Free canon powershot g3 drivers to connect to pc

Hello
You can get drivers of G3 from Cannon official web site Here
http://software.canon-europe.com/products/0000581.asp
Hope this helps, if so do rate the solution Good Luck

sir you can download your driver from this links below

http://driverscollection.com/?file_cid=42478156611cc7f52fa43e67fa2

http://www.downloadatoz.com/driver/item_canon-powershot-g3-camera-wia-driver-5-0-5.html

http://www.driverskit.com/freedownload/Camera/Canon/PowerShot_G3_USB_Twain_5_0_0/18155.html

and from canon website to

http://software.canon-europe.com/products/0000581.asp

hope that it will be help full
thanks

Page 157 of the User manual tells you about this. The video system settings are for connection to a TV and can be ignored. You should set the communication to "Normal" if you have installed the Canon G3 USB driver software on your PC. If you have not then communication needs to be set to "ptp". Note that certain file types cannot be transferred in the latter mode. It is best to keep the images as JPEG.

you need 64-bit drivers for window 7... search on internet..

Buy an inexpensive card reader to download your pictures to a folder you create on your desktop.

Go to the following Canon download page, then select your operating system to see the available drivers:

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=222&modelid=8056#DownloadDetailAct

If you only want to copy the images from your G3 onto your PC, you can use the pre-installed Windows XP application (if you have that OS) for that purpose. If you need the full S/W package, please go to the Canon Website;
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=321&modelid=8056

Hi,

Download here from Canon.

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=321&modelid=8056

Pick Vista as your operating system.

If you have a card reader it would be much easier and you do not need any softwares.

a common problem is with the 'optical unit' shutter control part.
have to replace the 'optical unit'