Slow cooker will only stay on warm. How do I put it on high?
This slow cooker has 3 settings LOW, HIGH, & WARM
When you plug the slow cooker in the display should show a "0". When you press the "COOK TIME" button, the display should go to 1 then 2 then 3 etc. each time the "COOK TIME" button is pressed. If 1,2,3,4,5 or 6 hours are selected, then the slow cooker will operate on the "HIGH" setting. If 7,8,9, or 10 hours are selected, then the slow cooker will operate on the "LOW" setting. To start the cooking cycle press the "ON/OFF" button. To interrupt the cooking cycle at any time, press the "ON/OFF" button. When the cooking cycle is complete, your slow cooker will automatically switch to the "WARM" setting. If the "ON/OFF" button is pressed when the the digital display shows "0", then the slow cooker will automatically start on the "WARM" setting.
If the "COOK TIME" button does not change the display numbers then unplug the slow cooker and hold both buttons down as you plug the slow cooker in. Keep the buttons pressed for a count of ten, then release them and the slow cooker should work correctly
4,864 views
Usually answered in minutes!
This slow cooker has three settings: LOW, HIGH and WARM..... When
your corningware slow cooker is initially plugged into a wall outlet,
the display will show "0". This display indicates the programmed number
of hours for which a meal will cook. The slow cooker can be programed in one hour increments from 1 to 10 on your digital display. The number of hours may be selected by pushing the COOK TIME button until the desired cooking time appears. If
1,2,3,4,5, or 6 hours are selected, then the slow cooker will operate
on the high setting. If 7,8,9, or 10 hours are selected then the slow
cooker will operate on the low setting. To start the cooking cycle
press the ON/OFF button. To interrupt the cooking cycle at anytime,
press the ON/OFF button. If the ON/OFF button is pressed when the digital display shows "0", then the slow cooker will automatically start on the warm setting.
×