Totota Car Radio Code

a car is it not told (model ,year, maker)
no maker of radio told at all.
Ford or Clarion. or Panasonic or ,well endless list.

google says there is no such radio, at all, on earth
so you didnt remove the dead radio, see that tag on top
and tells what it really is.

no car told
did car come new with this radio, if yes only ask them.

it is an anti theft device that activates when power to the radio is cut
the code would have come with the new radio or is in the user manual for the radio

disconnect the battery for 30 min. then reconnect . the radio will ask for the code again . type it in & you should be good to go . Good Luck

It's a radio security feature. When you disconnected the battery, it was just like you removed the radio. Your radio won't work in any other Volvo, to prevent it from being stolen and used in another car. You need to take it to the Volvo dealer to unlock the radio.

With the car, comes a plastic "infocard" with the radio and alarm codes. If you lost the card or didn't receive it with the purchase, you can ask for the code to the radio manufacturer, they'll ask you the serial number of the radio and the car and they'll send you the code.

The radio will have to be removed from the car dashboard
.Then please quote the MAKE + MODEL of your radio plus ALL the LETTERS and NUMBERS on any LABELS , BARCODES or STAMPED IN THE METAL CASING.
Also quote the MAKE of CAR it is fitted into.
Please note: Not all stereo codes can be calculated from the Serial Number


However many VOLVO dealers will give you the code for free if you have the car`s VIN number and radio Serial Number + paperwork

Go back to the dealer and go to the service department and tell them your situation. They need to call and get the code for you!

To get the code for the radio. Fist you need to get the model number and serial number of the radio. Which is at the top of the radio or the bottom. This requires you to remove the radio to get to it. Once you have this you have to go to the dealership and give them the serial number and model number to get the code..

From LustyKid:

Steve:

Suggest you read th manual on the radio. Some radios you have to push in the on off button until the enter code window appears.

In other words push in to turn radio on and hold it in that position until the code window appears in the screen. Then enter code.

Never heard of disconnecting the battery to clear the code. All that does is tells the radio that an attemp was made to steal it, thus regenerating the lock 10 code. What it does clear is the ECM Module codes. Who was the dumbwit at the dealer that told you that? He needs to be sent back to school.