Hi I have a hitachi LCD projection TV my lanp and

Make sure all the fans are working correctly. If the problem persists then it might be the ballast, the power supply or a bad temp sensor.

Call hitachi service center to fix it. It may have a circuit problem or the lamp itself is deffective.

If you replace the lamp and reset the lamp timer then that will do it.
For resetting of the timer, see instructions within the lamp box.
Hope that helps.

I have hitachi lcd rear projection tv model 60v500A at first I was getting a red spot on centar of tv with in two mounths the spot got bigger. I chanched the lamp but now i don't have a picture, the red indicator on tv is now blinking.

The lamp is dead.The lamp in the tv now,been in used 1 1/2 or 2 years?The lamp life span is over.

How long has it been sense you changed the lamp? This type of symptom seem as if it could be the lamp needs replaced. Check the manual for the lamp number. Make sure you buy an original hitachi lamp. I assume this is the brand. Hope this is helpful.

did you try setting the lamp over the red light on the tv?

Hi,
Replace Lamp in TV, lamp replacement procedure is written in user manual.

Refer to owners manual ! Blinking indicates the type of fault that is occuring on all your tv sets. example : power light on red - indicator light beside it green but blinks rapidly for half a second rapidly then shuts off. This refers to a faulty lamp or a lamp that is near its expiration. Read your manuals if indicators refer to easy repair sweet, but if it says call tech then bummer...

This sounds like a lamp failure. See your owners manual for instructions on replacing the lamp.