BK 600 Bluetooth headset

The pin you need is four zeros.

You need to press the Bluetooth logo "On" button to turn it on but keep holding it down for a longer time until the red and blue lights start alternate flashing, pairing the headset before entering the, password: 0000.

Turn on Bluetooth within your phone - Consult phone instruction booklet

Put phone into pairing mode - Consult phone instruction booklet

Put headset into pairing mode - With headset off, press and hold Call Control Button
until the headset begins to flash red and blue.

Select "Add new device" on your phone.

Select the Plantronics headset when prompted. Enter "0000" as passcode.

Your 925 headset will now have a continuous blue light blinking.

Choose "Yes" if your phones asks if you want to bond to the 925 headset.

Your phone is now paired with the Plantronics 925 headset and ready for use.

Please leave me a good rating!

1 Enter Pairing mode.
• Turn off your headset and press and hold the Multifunction
button until the blue indicator light remains lit
after blinking.
• If you turn it on for the first time, it proceeds into Pairing
mode immediately.
2 Search for and pair with your phone according to your
phone’s user guide. (Bluetooth PIN: 0000, 4 zeros)
• If the pairing is successful, the blue indicator light will
flash 10 times rapidly before entering Standby mode.
• If the blue indicator light remains lit, retry pairing.
Pairing with your Bluetooth phone
When the headset and the phone are paired, the
headset attempts to reconnect automatically each
time it turns on. Otherwise, press the Multi-function
button to reconnect.

USER GUIDE

Last 4 digits of your phone #

hi thanks for using fixya!

Connecting a Bluetooth headset or hands-free speaker unit to your phone involves setting the headset to “discoverable” mode; check the headset manual for how this is done, as it varies by type and model. You’ll also need to find the headset PIN code in its manual – this is usually 0000 or 1234, but again it varies.

Go to Bluetooth menu – from the main menu highlight Settings (Figure 1), click Select, and scroll right to highlight the Connectivity tab. Highlight Bluetooth (Figure 2), click Select and then highlight Handsfree (Figure 3) and click Select.

When prompted to ‘Add a handsfree device’, choose Yes (Figure 4), and your phone will look for all discoverable hands-free units (Figire 5). Select the one that you want from the list that appears and enter the hands-free unit’s PIN code when prompted. The pairing will now be complete.

Once paired, you’ll find the headset listed under the My devices menu in the Bluetooth settings area, from where you can connect and disconnect it.

Hope it will help you. If you need further assistance, let me know!

Regards!

the passcode should be 0000 I've looked into two manuals for it I think I may have to look in to a 3rd? let me know if that didn't work and I'll triple check it.


Thanks,
Ekse

0000

Hey I found the solution :
1. When the headset is off, press and hold the multifunction key until the indicator light is continuously displayed.

2. Switch on your compatible phone.

3. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices.

4. Select the headset from the list of
found devices.

5. Enter the passcode 0000 to pair and connect the headset to your phone.

In some phones you may need to make the connection separately after pairing. You only need to pair the headset with your phone once.

If the pairing is successful, the indicator light starts to flash slowly, and the headset appears in the phone menu where you can view the currently paired Bluetooth devices.

The headset is now ready for use.

Enjoy..
Pavan