Bunn NHB Coffee Maker Logo
Posted on Feb 04, 2010
Answered

How do I replace the warmer switch on my Nhb Bunn coffee maker?Its the red lighted one at the top fromt of the machine.

Answer This Question
  • chris turk
    chris turk Mar 15, 2015

    one of the reasons i bought this coffee maker is , it bosted all parts are replaceable, warmer plate, switche's heating element , fuse's, rocker arm. , even my older model had a design flaw with the resivoir and tbunn made a repair kit , 2 seconds to install, that unit is 9 years old and still works great, my newer one is 5 years old and needs a warmer switch, found it for $12.95, free shipping .

  • lou lek
    lou lek Feb 13, 2017

    can you share the name of the place where you found it? much appreciated. Thanks.

×

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.
Corporal:

An expert that has over 10 points.
Problem Solver:

An expert who has answered 5 questions.

  • Contributor 12 Answers
  • Posted on Aug 21, 2012
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.
Corporal:

An expert that has over 10 points.
Problem Solver:

An expert who has answered 5 questions.

Joined: Aug 21, 2012
Answers
12
Questions
0
Helped
12253
Points
12

I replaced moine by, gently popping it out and gently removing leads, that is the part that needs replacing, with the model # you can order it from ereplacementparts.com

Anonymous

Level 1:

An expert who has achieved level 1.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.
Problem Solver:

An expert who has answered 5 questions.

  • Contributor 8 Answers
  • Posted on Feb 05, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.
Problem Solver:

An expert who has answered 5 questions.

Joined: Oct 21, 2009
Answers
8
Questions
0
Helped
7842
Points
25

I work for BUNN. Replacement parts for electrical components are not available, but your brewer has a 3-year warranty. Our customer service team can help you determine the best solution. You can contact them at 1-800-352-2866 or thru our on-line service form http://www.bunn.com/retail/service/service_form.html

  • John Tompkins
    John Tompkins Nov 12, 2014

    so you are telling me that I can't buy a possibly $10 part and that I HAVE to buy a new $100+ unit just so I can tell if I left it on from across the room

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Red light won't come on
Assuming your talking about the warming plate light, Google "bunn nhb warming switch" to search for replacements.
Read full answer
Apr 23, 2014 • Bunn NHB Coffee Maker
0helpful
1answer

My 2 year old Bunn coffee maker was working last night but I went to make coffee this morning and the water was not hot, the switch on the side was off and the warmer wouldn't come on. I tried another...
Most probably the relay that drives both the heating element and the warmer.

A black thing like little box (relay)that containes 8-6 wires (2 from main board and rest just go other components.)
Thanks
Please rate my work
Read full answer
Sep 17, 2011 • Bunn NHB Coffee Maker
0helpful
1answer

I have a Bunn NHB coffee maker, after the coffee brews the warmer plate is cold and does not keep coffee hot, light switch is on but warmer plate is cold, Is it replaceable or should I send the whole...
If you will call customer service at 800-352-2866 with the model and date code, we will be happy to assist you with this issue.
Read full answer
Dec 13, 2010 • Bunn NHB Coffee Maker
0helpful
1answer

The top burner on our bunn coffee maker is getting to hot, causing the coffee to pop, do you have any suggestions on how to fix this problem? Please advise
Bunn makes a spacer that goes on top of the burner to put space between the burner and the coffee pot, or you can make your own out of a coat hanger. The only other way to fix this is to replace the warmer plate.
Read full answer
Nov 19, 2009 • Bunn NHB Coffee Maker
0helpful
1answer

I lost my directions to my bunn coffeemaker. Can you tell me how to make the first cup of coffee in a bunn? Is there just one place to pour the water? Fo you leave it plugged in all the time?
it has a reserv tank equal to 2 pots which are hot all the time
the power switch is only for the warmer plate
you get out about what you pour in,
Read full answer
Nov 23, 2008 • Bunn NHB Coffee Maker
0helpful
1answer

The warmer will not turn on.
its either the switch or the warmer element
check with an ohm meter {unplugged}
Read full answer
Nov 15, 2008 • Bunn NHB Coffee Maker
0helpful
1answer

Does not heat water or dispense water and warmer light does not turn on i have tried multiple times to fill the resivor but still nothing. i have followed the instructions to the letter and to no avail i...
There may be a thermal cut-off switch inside that has failed. I've by-passed the switch myself, but don't recommend it. Another option is to replace the cut-off switch.
Read full answer
Sep 19, 2008 • Bunn NHB Coffee Maker
5helpful
3answers

On-Off light not working
My coffee maker is about 15 years old. The on and off switch works but the light does not. Is there a way to replace the bulb.
Than You
Judith 54
Read full answer
Sep 08, 2008 • Bunn NHB Coffee Maker
8helpful
1answer

Bunn coffee drips slow
I had the same issue, poured in 8 and out came 6. Here's what I did to clean and fix.
1) Unplug the NHB
2) Remove accessories like the pot and basket
3) Bring NHB over to the sink
4) Snap off the entire top cover (not the swing lid) by starting at the front and lifting upward (the top cover is about 1/4" thick). The back of the top cover will pivot a bit and then pop off exposing the pour reservoir. Remove the flow stopper inside the pour reservoir by lifting it straight up.
5) Place the top cover and flow stopper aside.
6) Remove the brew diffuser (located underneath the top where the brew basket goes. Twist counterclockwise gently but forcefully enough to snap it past the lock tabs which hold it in place. You'll know that it you've done this correctly when it just falls out.
7) Still over the sink, tip the NHB in a fashion where the back side is facing upward and the brew side is facing down into the sink. You'll be holding the NHB horizontally by the top and bottom of the unit. This will allow any water in the tank to pour out the brew spout. Begin to tip the unit as if tipping upside down as this will allow any remaining water to drain out. If this does not work the brew spout hose may be clogged and you can just tip the unit entirely upside down to empty it from the fill hole in the pour reservoir.
8) Return the NHB to the upright position in the sink.
9) Using a scotch brite sponge and some baking soda, clean the inside of the pour reservoir and rinse.
10) Using the tool Bunn provided, clean out the brew spout hose which is located under the brew hat. This is the little hole where the water comes out. If you don't have the tool Bunn provided you could use something like a plastic tie-wrap. Don't use anything metal as the hose you're cleaning is made of plastic tube and could become punctured. Clean this hose for just a minute or two to ensure that there are no significant obstructions.
11) With the NHB upright in the sink, pour a slow stream of hot water from the faucet, about two cups, directly into the fill hole located in the pour reservoir.
12) Tip the unit horizontally, as in step 7, and place the tip of your finger over the pour reservoir fill hole covering it completely.
13) Shake the unit back and forth horizontally so the water in the tank splashes around and frees anything which may be built up in the tank. Some water may splash out of the brew spout hose.
14) Tip the unit as in step 7 to drain the tank water out.
15) Fill a 16 ounce glass with hot water and 2tbsp baking soda, mix and pour into the pour reservoir fill hole.
16) Repeat steps 13 and 14 once.
17) Repeat steps 11 through 14 three times.
18) Clean the pour reservoir cover, swing lid and flow stopper.
19) Put the flow stopper back in place.
20) Attach the top cover.
21) Clean the exterior of the NHB.
22) With the boil and warmer switches off, plug the NHB into the electrical outlet.
23) Turn the boil and warmer plate switches on.
24) Fill the NHB with one pot of cold water and close the swing lid. Wait one minute.
25) Fill the NHB with another pot of cold water. Place the pot on the warmer plate and close the swing lid. If water does not yet come out, fill with one more pot of water.
26) Allow water to drain from brew spout until it stops draining.
27) Empty pot.
28) Fill pot to 10 cup line and pour into the NHB. You should find that the NHB now delivers 10 cups back to the pot. Empty the pot.
29) Clean brew spout diffuser and replace back in the brew hat.
30) Clean the pot, pot lid and brew basket.
31) Wait ten minutes for the water in the tank to boil.
32) Brew your coffee as you normally would.

The only issue I experienced during this process was with the warmer plate switch. It appeared that the light in the switch blew although the warmer plate still warmed normally. Shortly after the water in the tank started boiling the warmer switch light started operating again.
Read full answer
Apr 05, 2008 • Bunn NHB Coffee Maker
0helpful
1answer

Warmer not working
This would only applie to a newer modle. I can tell u this that if u contact the company by phone they will offer you a replacement at no charge to u.
Read full answer
Dec 22, 2007 • Bunn NHB Coffee Maker
Not finding what you are looking for?

View Most Popular

NHB Coffee Maker

  • Coffee Makers & Espresso Machines

Related Question

Red light won't come on

  • Bunn NHB Coffee Maker

Related Topics

2,966 views

Ask a Question

Usually answered in minutes!

Popular Questions

How to fix a bunn coffee maker that trips a gfi

Bunn NHB Coffee Maker

My Bunn BX-B coffee maker

Bunn 10 Cup Home Coffee Brewer

Tim Horton's home brewer Bunn coffee maker

Bunn Pour-Omatic Coffeemaker, 10 Cup...

Bunn B10-B leaks

Bunn B10 Coffee Maker

My Bunn BTX-B coffee maker won't heat the water anymore. I do not hear the water heating either? I have tried emptying the water and staeting over but the heater is not coming on. Is this fixable

Bunn BTX-B ThermoFresh 10-Cup Home...

Top Bunn Coffee Makers & Espresso Machines Experts

vince

Level 3 Expert

2530 Answers

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66853 Answers

Are you a Bunn Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...