Internet & xbox live sametime Netgear 8-port 10-base-t Ethernet Hub en108

Try the direct connect to the internet with the PS3 first and if that works then we can start troubleshooting further

I would all of them to the router given it has enough ports. hubs are rarely use any more most people switches these days. router to switch to devices(xbox,computer) switches handle internet traffic better

You can add more ethernet ports by purchasing a 4 port hub or 8 port hub.
Connect a LAN cable from the Netgear wireless router to one of the ports on the hub and then connect the other computers to the ports on the hub.

Hi,

You need a router not a hub or a switch. with the help of the router you can share the comcast cable internet on multiple devices. A hub or a switch can not do this.

Get it replaced with a router. You can buy Linksys or Netgear router.

Rashish

Are you sure you got a compatible modem? They are not all alike.

leeb..... switches cannot be connected to the Cable modem.... because NAT will not be enabled in cable modem....so there wont be any DHCP server present in the cable modem....
Nat will be enabled only in DSL modem like AT&T verizon etc....So DHCP server will be present inside DSL modem...that is the reason why switches can be connected only to the DSL modem....
With NAT enabled modem, switch will work as a switch.... With NAT disabled modem, switch will work as a hub.... This is the difference....
Any doubts further ? please clarify with me.... I am ready to help you....

Hi,

Please note that the product model EN108 is a 8 port 10 BASE-T Ethernet hub. It does not support 10/100 Mbps connectivity.

Hope this helps.

If you're asking if two computers can be online at once when using this unit, then the answer is yes, they can.

If you're confused as to why two computers can get online at once with that unit, well... That's what it's supposed supposed to do.

You might open this ports to the Gigafast Ethernet router :

TCP 80, 3074 and 53

UDP 88, 3074 and 53

Note: You'll needing to open these ports to the virtual server or port forwarding under advance settings of the router.

just plug the power connection
and connect the network cables. and restart the computer.

Summary for Dynamode (HT809STP)
Dynamode products have earned a worldwide reputation for quality. The Dynamode hubs products utilize state-of-the-art design and ASIC-base hardware for high reliability.Dynamode offers the 8-port Ethernet Hub which, in compliance with IEEE 802.3 10 BASE-T standard, is a multi port repeater used in the twisted pair Ethernet Network. Featuring 8 RJ-45 twisted pair ports for twisted pair wiring, one AUI port for thick cabling and one BNC port for thin cabling, it allows to connect up to 8 devices (such as twisted pair Ethernet card), an Ethernet Transceiver and a Tee connector.