I need the remote codes for the sentry rmc10 really big universal remote,
This is the way to enter any device using the rmc10 really big universal control.
1. Turn the device one that you want to program. (The tv, dvd, vcr, etc.)
2. Press and hold the CODE SEARCH button until the red light remains lit.
3. Press and hold the device you want to find (example TV, VCR etc.) Release it quickly. It wil blink once.
4. Continuly press the CH+ button until the device turns off. This may take a lot of time and many clicks.
5. Once the device turns off, press the MUTE button. This stores the code.
6. Press the ON/OFF button and the device should come on.
There you have it! Save this information so you will have it next time.
Here are the Universal Codes & Instruction for the Sentry RMC10 Jumbo Remote:
http://www.megaupload.com/?d=NQH8Z0X6
It is in PDF format, so you would need the Adobe Reader (http://www.adobe.com), or other alternatives such as (the Foxit Reader, which can be obtained from http://www.foxitsoftware.com) in order to open it.
As far as entering the code goes, it shouldn't be that hard to program if you follow the instructions.
A brief synopsis on how to do it is as following:
1. Manually turn on your device. (TV, VCR, DVD, etc...)
2. Press & hold the "Code Search" button until the red light stays on. Release that button once the red light stays on.
3. Next press the device that you are trying to program on the universal remote, i.e. TV, VCR, DVD, etc...
4. Enter in the first code listed. The "Code Search" red light button will turn off once your code is enter.
5. Now test your device to see if the code works or not. If not, repeat
steps 2 through 4 all over again until you can successfully operate
your device. If none of the code works, then you have to look at the
instructions and follow through with what they say.
If that still doesn't work, then it could be that your device is not supported.
You can try contacting Sentry Industries for support. They are
available Monday through Friday from 8:30am to 4:30pm (EST - Eastern
Standard Times).
Sentry Industries, Inc.
Address: Po Box 885, One Bridge Street, Hillburn, NY 10931-0885
Phone: (845) 753-2910
Fax: (845) 753-2920
Good luck. This stuff should be self-explanatory. If you don't know how
to operate your universal remote, then just keep trying. You can't
learn anything if you're not willing to face the trials & errors.
Successful people never give up.
Put this into your browser:
Really Big Remote Control Codes Free
I just did it and was taken to the Sentry site where I downloaded the whole thing. It took about 20 seconds!
I have entry really big universal remote ( rmc10) but i loose de code please you help me thanks
Can not find one either - Syvania said that they are out replacemenst as well - having problems with distriburtors...
call back in 3/30/08
53,704 views
Usually answered in minutes!
need direction or manual and also the codes
Thanks
NEED CODES
i need the remote codes for sentry rmc10 really big universal remote
i need the code to program to my tv
need code for direct tv hi def receiver
I NEED THE CODE FOR A 32" SONY TRINITRON, PLEASE THANX! THE REALLY BIG REMOTE?
what is the code
I NEED A CODE FOR THE VIZIO TV TO SETUP A SENTRY REALLY BIG UNIVERSAL REMOTE
what is coming off the remote or the tv this is sooooooooooooooooo hard
i bought my dad a sentry rmc10 really big universal remote and cannot find the correct 3-digit code for his Vizio TV. Help?
Coding one button remote
I HAVE THE SENTRY REALLY BIG UNIVERSAL REMOTE AND I LOST THE INSTRUCTIONS HOW TO PROGRAM. NO CODE CAN ANYONE HELP
I have two Vizio TV's and two model RMC-10 remotes. Please give me the code for these remotes. I went through the mumbo jumbo of trying to find the code until my hand hurt. There has got to be a better way of finding the code!
lost my code list
need the code for an APEX t.v. and comcast cable box( motorola )
Need code for Curtis DVD Dolby digital
×