My DC16 will start and then stop. I have to take my finger off the trigger and start it again...this happens all the time. I have washed out the filters and checked the intakes...nothing will fix it.
My DC16 also had charging problems. I called Dyson and they sent a new charger. The old charger only produced 23.6 volts DC, not the rated 28 volts DC. The new charger has a thicker round wire and produces 28.1 volts DC. Put a volt meter on your charger terminals and see if it is producing enough voltage to fully charge the battery, 28 volt DC. If not you need a new charger.
6,610 views
Usually answered in minutes!
×