Help my hp dv2000 just keeps restarting??

hard drive or board check drive out first

Take it back to the service centre

Yes, the GPU is faulty. either replace the systemboard or reflow the GPU. Second option is cheaper and you can do it yourself. There's a link for a diy guide to fix that issue.

does your screen look like this?
http://bootmylaptop.com/hp-pavilion-dv2000-with-display-issue/

Go to Control Panel and open 'Add/Remove Programs' or 'Programs and Features' depending on the OS you have. Remove HP Quick Launch Buttons. Restart your PC. Go to C:\SWSETUP and install the HP Quick Launch Buttons software. If the installation prompts for a restart, do it and then try using the buttons.
If you still have problems, report back.

Maybe there are to many programs running in the background and thats interefering with the sleep function of the laptop cause it can't allocate enough memory to allow the screen to come back on.

in the search box in your start menu, type in msconfig and press enter. This will take you into the system configuration utility click on the startup tab and this will show you all the programs that are started up when you boot up into windows.

Go ahead an click on the button that says disable all, this will uncheck all of the boxes. Click on apply and then click on Ok and let the computer restart.

Once it restarts and you get back into windows, try again and you should be able to close the lid and then bring it back up and have the screen come back on like normal.

Check the swapping monitor function screen FN + F4 on Compaq.
It allows to change from internal to external or Both monitors.OR
Start in Safe mode with VGA basic settings and configure your Display settings.

The system cannot cope up the installed programs in your laptop. When you boot in safe mode try uninstalling new installed software or unneeded software then restart your laptop and try again booting normally.. TY

HOPE I CAN HELP

Hi sayeh,
I don't know if some of your IT friends had check the Wireless Zero COnfiguration,lets check it out.

start>run> type in services.msc
scroll down to Wireless Zero Configuration
check the status,
right click on it and click either start/restart

hope it helps

:)

i have built in camera in my laptop HP pavilion dv2000, its not working

Could you explain what are you booting from if like you said "no disk drive on this". What was the last thing the member of your family does on that PC? Any new installed programs, or hardware? Does the PC restarts itself after that "full circle" or stays frosen?