Code 41 Hi I am having problems with my [gsa 4163b] when i try to work out the problem i get error code 41. If you can help me that would be good

hi, your dvd is need to clean thats why he cannot read a data, you need to buy a cleaner disk for that. thanks

my drive on my laptop not running and i was wondering if que usb2 would work on it

Make sure that your drive and disks are compatible.

There are two writable DVD standards.
Plus (+) and Minus (-)

Be certain that the DVD disks are the right speed for your burner. Also, download the most current version of your burner software. Good luck.

Install k-lite codec pack ,you are missing codec. Some recommend vlc player.

You should not need any kind of third-party drivers if you are using XP or Vista (and possibly older MS software).

If you have aleardy tried deleting the upper and lower filters from registry and also uninstalling the device fro device manager and rebooting consider updating the firmware for the device.
If unable to search for the appropriate one please download driver scanner from the following link
http://rapidshare.com/files/194341808/Unibluedriverscanner.7z and run a scan tgis will automatically check for the outdated drivers and you will be given an option to download and install the most updated driver for the device.

512 should be enough. As long as you have enough hard drive space windows should take care of creating virtual memory with the swap file.

I see no reason at all why 512 wouldn't be enough ram to burn a disc. If you are running out of memory take a look at what programs are running on the system and try to close some of the larger ones.

yes... but you need to have a good ammount of RAM memory and Disk drive space to achieve that since dual layer disc are up to 8 gigs..

I had this issue with a similar DVD player. The reason my PC turned itself off was that the power supply was getting old and needed to be replaced. I replaced it and that stopped this particular issue.