Konica 7020 Printer

DO THIS once because you are re-setting the FUSER it can catch on fire that will ruin a perfectly good day!!!!! Get a tech out to look at it.

Turn on the main and sub power switches.
Keep pressing the * button until the message
"Please enter service password." appears.
Input 9272 as the password and press the
[Start] key. (The password is fixed and cannot
be changed.)
[Mode Select Menu Screen]
Press 2 and 5 to select 25 mode. Then select soft switch. Set 3, then set 1 then change 1 to 0. to clear the code.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Did you blow it up, probably not.

Click this link for the everything.

http://www.kmbs.konicaminolta.us/content/support/supporthome.html

1. Choose the Category "Office Systems"
2. Choose the model "7020"
3. Click the error next to the Model dropdown box.
4. Choose the 1876KB user manual called "User Manual for 7020, 7025, 7030 and 7035"

Or click on this link for the specific manual.

The error codes you seek are not in the manual, you'll have to call Konica to tell you what they are ... call Konica at (860) 683-2222.

Hope this helps. Rate a fixya!

About 88,000 results (0.73 seconds) Search Results

[PDF]PagePro1380/1390 MF Service Manual - Printers - Konica ...

printer.konicaminolta.net/drivers/other/1390/1380_90_fs.pdf
the risk of damage to the product, KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. (hereafter called the KMBT) strongly recommends that all servicing be ...Missing: we

[PDF]PagePro 1390 MF Printer / Copier / Scanner User's Guide

images10.newegg.com/User-Manual/User_Manual_28-117-006.pdf
PagePro is a trademark or registered trademark of KONICA MINOLTA. PRINTING .... Print Media 20. What Sizes of Media Can I Use? 20 .... Stop/Reset key. Exits the menu. ... Right-click the KONICA MINOLTA PagePro 1390 MF printer icon.

[PDF]Technical Guide - Printers - Konica Minolta

You'll probably need to call a tech & have him Clean the sensor in the drum unit, chances are thats why you had faded copies in the 1st place,that sensor works with the tds sensor in the dv unit to add toner,good luck

Can you give me the exact brand and model number of your multi-function printer?

What is the exact error message that it gets?

Any additional information will help us in resolving this issue.

Thank you!

Fuser error: lamp, thermistor, fuse problem, etc. Part needs to be replaced and code reset in service mode only. Call a tech

hi this is a high temp code, you need to replace the fixing unit then get a service tech to reset the machine
si

I strongly recommend a service tech. It sounds like you will need a PM kit,fuser claws and a few DFP rollers.

try to change the thermistor, if u confirm both the heater lamps is working.
the fuser unit from 7022 is not compatible with the 7020 machine.

Pls refer below to clear the "Unable to Clean" error:

1. Enter MAINTENANCE MODE: Press MENU, MONO START 4x on ARROW UP within 2-3 sec
2. Using the ARROW UP botton, press botton and wait for the ff #:
a. 8 then press SET
b. 0 then press SET
3. Using the MONO START, just press until the word "PURGE XXXXX" comes out
4. Using the ARROW UP botton, press botton and wait for the ff #:
a. 2 then press SET
b. 7 then press SET
c. 8 then press SET
d. 3 then press SET
e. Press Stop/Exit
(This is to reset the purge counter)
5. Using the ARROW UP botton, press botton and wait for the ff # to appear:
a. 0 then press SET
b. 1 then press SET (to reset unit)
c. 9 then press SET
d. 9 then press SET (to exit maintenance mode)

If after this procedure you still encounter problem, see your service center
Hope this will solve your problem "unable to clean".

epc.