Error code OA-0543-0000 on trying to recover HDD

When your HDD (Hard Disk Drive) does not work, the computer would like a recovery disk, or with windows the Windows disk will do. If only the OS has some damage windows will see so and ask, should I recover the OS already on the HDD. If you choose that opting, the CD will try to recover everything.
If your HDD is really defect and can't be recovered by the OS, toy have to replace the drive and setup the computer again. You have lost all data and all program m's on the HDD, so I hope you have a backup of at least all your data.

Good luck

Where do you get error OA on an XP4030, the machine does not have a display?

F101 HDD failure,,08-9030..or update the firmware version.if not okey replace the HDD.

That is either a currupt partition or bad sectors on your hdd.
You will need to run the recovery media and see if you still get error messages to know if it is a failing hdd.

F105 indicates HDD other error

Perform the bad sector check (08-694). If the check result is OK, recover the data in the HDD. If the check result is failed, replace the HDD.

8 flash is a pipe temperature error.

F103 indicates HDD transfer time-out.
U can try format the HDD (08-690).
Then u perform the bad sector check (08-694). *take long time
If the check result is OK, recover the data in the HDD. If
the check result is failed, replace the HDD.


* replacement of HDD require firmware update

Error code "OA"....machine thinks it has a faulty Laser unit. You can try a reset ( Menu, *,M..press ENTER.) if it resets GREAT.
If not and the code comes back,most likely Laser unit is defective.
Expensive and time consuming repair.

HOW TO RESET ERROR CODE F-120 IN TOSHIBA STUDIO 232