Nixon Super Rover NIX0123 Logo
Posted on Feb 14, 2008

Nixon super rover..need to know how to reset the chronograph

The chronograph stopped halfway round the watch when the battery ran out so now that it has a new battery it starts from the same point every time,,i have no instructions and need to know how to reset it please???

  • tcgreenwood Jun 17, 2008

    I have the same problem. Watch has been fixed twice and each time the chronograph stops at 55 instead of zero. How do I get this fixed? Nixon seem to insit that it should stop at 55 and you reset it manually, but when I bought the watch this did not happen and it reset to zero automatically.

×

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on May 20, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

Joined: May 20, 2009
Answers
1
Questions
0
Helped
681
Points
8

Pull the stem all the way out...like your setting the date. Then hit the upper button and that will move the hand 1 second at a time until it gets here you want.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

What size battery does a Nixon Men's Rover II A355-001-00 take

Take the watch to any jeweler and they can open it for you and install the correct battery. The battery number is on the battery.
0helpful
1answer

My nixon won't run and it just came in today. Is the battery dead?

That is the most likely cause. The battery may have sat in the watch for a long time before it was sold and it may have been on the shelf for a long time before it was put in the watch. Replace it first and if it doesnt not last long, the watch may have a problem with its internal parts.
0helpful
1answer

How do I reset the millisecond hand used in the stop watch function on my nixon Ride SS watch?

Try this:
Resetting Chronograph Hands:
Note: Some Nixon watches come equipped with a "screw-down" crown; the crown must be unscrewed by turning it counterclockwise before it can be pulled out)
1. Pull the crown all the way out to position 2.
2. Push the crown in slightly to position 1.
3. Push top pusher button to advance the second hand to line up with the 12:00 position
4. Push the crown back in. (Make sure it is screwed in if it is a screw crown)

Jan 02, 2014 • Watches
0helpful
1answer

Can get the time to start

The watch is a chronograph. If the time hands are not working, minutes and hours, you probably need a new battery. If they are working and it is the chronograph(stopwatch) hands you can't get going then you need to push the buttons that control the chronograph.
0helpful
2answers

I need a couple of extra links to my black and silver Super Rover

mcdevito75 here, BEST BET, look for a small watch repair shop in your area, chances are you"ll have to order these links from Nixon watch.
2helpful
1answer

I change the battery of my nixon superhero TI/PU and now i cant see the digital numbers what can i do??

you need to restart digital part of the watch. Open it ( the screws part) and there you will find 2 reset contacts. You need toen close the contacts with the big battery in it. Then it should start working. This acion have helped me few hours ago.
5helpful
1answer

When I reset my chronograph, the second does not stop at the 12 but stops about 4 tics past 12.

pull out the stem to the first or second posistion and use the top or bottom buttons to zero it out.
Not finding what you are looking for?

691 views

Ask a Question

Usually answered in minutes!

Top Nixon Watches Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you a Nixon Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...