Sears Gas powered blower 25cc/1.5 Cu. in 2 cycle 200 MPH/400 CFM Where's the fuel filter, so I can clean it?

Operator's Manual - CRAFTSMAN

Sears https://i.sears.com > mp-tc > prod_1977954512 PDF WEEDWACKER GAS TRIMMER. R. Model No. 316.711192 ... 25 cc (1.52 cu. in.) 0.025 in. (0.635 mm) ... Always use the fresh fuel mix explained in your operator's manual.

Operator's Manual - CRAFTSMAN

Sears https://i.sears.com > mp-tc > prod_1977959112 PDF Operator's Manual. CRAFTSMAN. 2-Cycle. WEEDWACKER GAS TRIMMER. Model No. 316.711471. INCREDI-PULLMW/TH. UNBELIEVABLE STARTING EASE™. CAUTION: Before using this ...

Instruction Manual

Sears PartsDirect https://c.searspartsdirect.com > doc PDF Jan 10, 2005 - For one year from the date of purchase, when this Craftsman DGas Powered. Weedwacker. Line Trimmer is maintained, lubricated, and tuned up ...

User manual Craftsman CMXGTAMD25SC (English

Manua.ls https://www.manua.ls > not categorized > Craftsman Manual. View the manual for the Craftsman CMXGTAMD25SC here, for free. This manual comes under the category not categorized and has been rated by 3 people ...

Operator's Manual

Sears PartsDirect https://c.searspartsdirect.com > doc PDF Operator's Manual. M. 4-Cycle. WEEDWACKER® GAS TRIMMER. Model No. 316.794490. CAUTION: Before using this product, read this manual and follow all its Safety.

Craftsman WEEDWACKER 358.791520 Instruction Manual

ManualsLib https://www.manualslib.com > manual > Craftsman-We... View and Download Craftsman WEEDWACKER 358.791520 instruction manual online. 25cc/1.5 cu.in. 2-Cycle 17 Inch Cutting Path / 0.080 In. Line GASOLINE ...

Craftsman WEEDWACKER C944.514460 Instruction Manual

ManualsLib https://www.manualslib.com > manual > Craftsman-We... View and Download Craftsman WEEDWACKER C944.514460 instruction manual online. 25cc / 1.5 cu.in. 2-Cycle 17 Inch Cutting Path / 0.080 In. Line GASOLINE ...

most of my 2 cycle machines are 50-1 which amounts to 3 ounces of oil per gallon of gas. If 32-1 than it would be 4 ounces of oil per gallon of gas. Hope this helps.

There is a tab on the inside of the screen use a screw driver to open the cage. Keep in mind it is spring loaded and will snap back shut.

Probably need the H speed mixture adjusted.

well start with the fuel lines, then suspect a bad carb

50:1 is a common ratio

Most 2 cycle engines need at least 90(ish) psi to at least run. Most need more to run correctly.

sounds like magneto going out .. it puts the spark to the plug

Try 40:1. Better to have too much oil than too little. If you find the exact ratio then use that. ...Lee

no it sounds as though you have a bad coil