Onetel OT8500 Hi Please can anyone tell me the maufacturers site for Ontel Dect phones. I need to change the pre recorded message on the answer unit. I misplaced the manual. Was hoping I could download it from their site. Don't really want to pay for one unless I really have to. Many thanks Tracy

You can record your own greeting message (max 2 mins & 30 secs). If you don't record a greeting mesage, a pre-recorded greeting message is used & asks the caller to leave a message. (Make sure your phone has the correct date, time, year, etc.)

To record a message:

1. Menu (OK) the "Answering Device" (OK), the "Record Greeting" (OK)

2. Then after the handset beeps, speak clearly about 20 cm (8 in) away from the mike.

3. To stop recording, press (OK)

4. (Off)

Hi Ken.

Here the manual for Presidian 43 series.

Regards.

Ginko.

Recording a Personal Greeting
Your answering system comes with a pre-recorded outgoing message or greeting that plays when you receive a call: “Hello, no one is available to take your call. Please leave a message after the tone.”
You can record your own personal outgoing greeting. Your recorded greeting must be between two seconds and thirty seconds long.

1. Press /mute. The system announces the number of new and old messages, then starts to play themessages unless it has no messages.
2. Press 5 to stop the announcements or message playback. You will hear intermittent beeps indicating that thesystem is in the command waiting mode.
3. Press 8 to start the recording. The system announces, “Record greeting.” Begin recording after the announcement.
4. When you finish recording, press 8 again or press 5. You will hear a confirmation tone, and your recordedgreeting plays back for you.
   

Selecting a Greeting
Once you have recorded a personal greeting, the phone automatically switches to your personal greeting. You can also switch back and forth between the pre-recorded greeting and your own greeting at any time.

1. Press the /mute. The system announces the number of new and old messages, then starts to play the messages unless it has no messages.
2. Press 5 to stop the announcements or message playback. You will hear intermittent beeps indicating that the system is in the command waiting mode.
3. Press 6. The system plays the current greeting.

Hi, had similar trouble. You need to go the base station and hold down the find handset button for 5 seconds so it flashes and then go through the menu process to register. you will need to type the pin for the base usually 0000 or 1234.

To record a new OGM, on the Onetel OT150

Press "menu" on the base unit, then "up" once to record OGM 1 or twice to record OGM 2.

Press "OK" The existing OGM will begin to play. Whilst this is playing press and hold "MEMO"

Record your message, speaking close to the base unit. Press "stop" (square) when finished.

If you decided you don't like your message then, repeat the process above but when it tells you to record your own message press "stop" (Square) and the default will be reset.

push the mute button on your cordless uniden phone,and you will see the number 5 come up on the phone display.then hit the number 6 and when you hear it begin to beep record your message

Hey! To play messages press the clear/mute button then the number 2 button and then press the green phone symbol then your messages should play. To turn off do exactley the same but instead of pressing number 2 press number 8! Hope that helps!

no suggetions

Hi - took me ages to work out without the manual, but when you're in the answerphone menu (described above), press 9 (record OGM) then either 1 or 2 (1 for OGM 1 and 2 for OGM2), speak your message, then press 5 (stop), the message will automatically replay, then you're sorted

BRIAN