How do i change didplay name on extention for nortel network T7208. i am a new employee and i realy want to change the previous employees name

usually the admin password is left at admin (23646)

Alice, you are correct on both counts.
[email protected]
Feel free to email me with more details if need be.

Try Feature ** ADMIN (23646) and password 23646. This should let you in to make name and time changes.

After entering the mailbox access F981, press "#", the display should change from Pswd: to Log:. Now, enter the alternate mailbox number followed by the password for that box and "#". The remainder of the prompts should be the same as accessing the 'native' mailbox.

Programming is done on 7310, 7324 and 7316 type sets.
Enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow).
The display should now ask for an extension number.
Enter extension number you want to change the name on.
Press the show key (top right arrow)
The display should say LINE ACCESS
Press the next key (bottom right arrow) .
The display should say CAPABILITIES.
Press the next key (bottom right arrow) .
The display say Name.
press the Chng soft key.
use the dial pad to enter the name. advance using the arrow soft key to go to the next letter
ex. Bill = 2,2 -> 4,4,4 -> 5,5,5 -> 5,5,5
Press the next key (bottom right arrow) to enter the name.
Press the release key when finished

Do you know how to get into phone system programming? The extension names are changed in there.

This is probably not related to the phone itself but more likely related to the telephone system it connects to. You can configure an IP phone to connect to a telephone system at a external service provider but I would be surprised if their time was out by seven minutes so I'm guessing that you have an IP PBX in your office somewhere. It would have the names of the people at the different extensions. You probably have a support person who looks after your computers and operating systesms it is fairly normal in smaller offices for that person to also look after the telephones. I do this for two small businesses which have about 40 employees all togeather. Have a chat to your boss, someone should be responsabile for your phone system too. As time goes by it will just get worse and if it has a failure someone should know how it all works. Hope this hepls

I am assuming you have sharpdesk or network scanner tool installed on the computer you are wanting to send a scan to.
Click on start then programs and look for sharpdesk/network scanner tool and start the NST program. Once it is open/started you should be in the "profiles" tab and there should be some profiles listed (presumably the old employees name). Put a check mark next to the ones you want to delete and click delete. this will remove them from the copiers image send. Then create a new profile (add) with the new employees name and apply the changes. Restart the copier and the employees name should show up.

I am trying to changed my phone name as the person it belonged to is no longer here now.

You will have to go into system programming. If you are not familiar with it, you will need to call in a professional, as it is too hard to explain over posting.