Need parts i am looking for the top canopy the one that covers the sun and the front tray where can i get them?

hi ,
Do you still looking for the sun canopy for bugaboo 2009
I have one for sale in blue please email me on [email protected].
thnaks O.N

I have a Britax Vigour. One of the rear wheels in broken. If I cannot find a new rear wheel, I could sell you my canopy.

Good Morning

If the Zapp is under 2 years old please contact your retailer with your proof of purchase to discuss making a warranty replacement claim for a new sun canopy.

If it is over 2 years old or you do not have proof of purchase you can order a replacement sun canopy from your local Quinny retailer.

You may have the top on backwards. The flap is usually used as a sun shade, and should probably be over the open part in front of the stroller.

Do you mean Boogie? All the Zooper Boogies I've ever seen were originally sold with them, however if you have an older model, spare parts are harder to come by.

hi if the car seat you have is the cabriofix it already has sun shade, if you look on the back there is a button under the rim at the top ( on mine the button is silver ) hope this is helpful

hi maria10102..hope this helps..good luck!!!
The sun canopy is located in the rim of the shell.
• Place the carrying handle in the carrying position.
• Open the rim by pushing the button at the back under the rim and releasing it.
• The sun canopy is now visible in the opening
• Pull it out and place the ends of the sun canopy with the buttonholes over the hooks on the carrying
handle
• When storing the sun canopy, make sure you place it in the rim carefully and close the rim properly

http://www.instructions.maxi-cosi.com/download/cabriofix.pdf

Call the company directly. They carry many parts and you need only the numbers you already have. Good luck!

1. Infant restraint comes with four identical canopy support parts. Thread one canopy support completely through one sewn tunnel.
2. Slide straight end of a second support into the straight end of the first support.
3. On models with four canopy supports, repeat steps one and two for the other canopy tunnel.
4. Attach canopy in the areas between the infant restraint and the handle base.
To remove canopy, reverse the steps.

http://www.gracobaby.com/assets/pdfs/instructions/ISPC089BA_ISPC106AA.pdf

Hope this helps!! Thanks

yes you can. of course on amazon, take a look here Amazon com Baby Jogger 2 canopy and chose some of them :)
I hope this was helpful, cheers