Whirpool gas stove super capacity 465 the stove works but cant get the oven to work

stoves with an electrode start igniter do not lite up pilot by adding a flame, that will not work. u need to find out why and where is the power to igniter is not coming from? the spark module or a bad igniter?

Super Capacity 465 oven fix with service manual link

I hope this helps.

If you have an element that stays energized with the power off if it's 208/240 the heat relay on the control board is fused if 120 could be a board again or grounded

My Whirlpool Super Capacity 465 oven

You are looking at approx. $450.

Some gas ranges may take 10 or so minutes to light.
Other than that you may have a defective glow bar ignitor.
If it glows and does not light the reistance in the ignitior has failed.

Hi!!! check your oven spark module its inside the oven it looks like this pisture..The module provides the spark to all ignitors..Good luck..

I unplugged the appliance for an hour and after re-plugging, the problem went away.

Same thing happened to me about 1 month ago... Did you get some kind of power outage or lightning strike??? I am pretty sure the stove part works but the oven doesn't right?!?! It might be 2 things.. Either the temperature sensor inside the oven doesn't work or it's the control board (where the clock is). I tried to chaned teh temp sensor but it did not work. I then changed the Control Board and oven works again...

facing the front of the oven (while off) put your hand along the back of the oven toward the top left side. there should be a techinical spec sheet with a list of what the codes mean and possable solutions.