Software for windows vista

Do you have computers at work? You must have friends with a Desktop computer? Give them the disc and a USB memory stick. That is the long way around the problem, but you can download it online from the Singer Website :>D

CE-250 : Software

SINGER Futura Support https://futura-support.com > products > software
CE-250 : Software. Version: Update version 3.0.1.3 for Windows XP; Windows Vista; Windows 7; Windows 8; Windows 8.1. Release Date: 03/11/2013.

• 
  

  All: Software

  https://www.futura-support.com > node > all > software
  All: Software. Version: 4.2.0.3. Release Date: 05/02/2018. Operating System: Windows 10. Windows 8. Windows 8.1. Windows 7. Windows Vista. Windows XP.
  
  ..

Make sure the driver you are using is for Vista,

In order to switch from Vista to XP, you will need to basically erase Vista and install XP.

I'm not exactly sure what you mean when you say you have XP rollback discs but, you will need an actual Windows XP installation disc and product key.

First make sure the BIOS in your pc is configured so that the first boot device is your cd /dvd drive.

Insert the XP cd in the cd /dvd drive and reboot the pc. Your pc should then boot from the cd and enter the text based portion of the XP setup program.

Press the F8 key to accept the licensing agreement and then wait for the setup program to load the files it will need to continue the installation of XP.

Once the necessary files are loaded the setup program will check for an existing installation of Windows and will identify the partition where Vista is installed and ask where you want to install XP.

This is where you want to pay close attention to the information provided on the screen. What you want to do is to delete the partition where Vista is installed and then create a new partition. This will remove Vista from your pc.

After the new partition has been created, you can then install XP onto it. The setup program will copy the files needed for XP to operate and will reboot your pc so it can enter the graphical portion of the setup program.

The graphical portion of the setup program is where you'll enter the product key and then the installation will continue installing the necessary files until it get finished.

Once completed, Vista will be gone and XP will be your operating system.

I don't believe Autocad will work at all on Windows Vista.

The only other solution I can think of is to download Virtual Box from http://www.virtualbox.org/

You will need to have an XP cd to install, and basically you will be installing an XP virtual machine, at which time you can then install Autocad 97 onto that virtual machine.

Hope this helps!

use windowXP use both but load your software on win XP

Hi there.
The only way you can install XP on a Vista machine is to install "virtual XP" onto Vista using Virtual PC 2007.
Here is a site that will take you through the procedure step-by-step and gives links to download Virtual PC and install it onto the machine.
Please be aware that some drivers may not work whilst using XP when you have it installed.

http://lifehacker.com/software/windows/geek-to-live--run-windows-xp-inside-vista-with-virtual-pc-238071.php


Have fun, good luck and thanks for using FixYa!!

You cannot install Windows XP over WIndows Vista. Microsoft has put a lock on the Vista software and will not allow you to downgrade to a lower software. The only way you can do it is to wipe your hard drive completely clean first with a disk deleting software or with the command "fdisk" at the DOS prompt. However, this is dangerous and I do not recommend it unless you have someone professionally trained to do it. It will wipe everything off of your disk and then you can load Windows XP.

Don't forget to rate his solution with 4 stars before you log out.

You may need to run the setup directly from the CD rather than letting the autorun start and running it from there. Open up "My Computer" and go to the CD drive, right click on it and select "Explore" find the "Setup" file, and right click on that, select "Run as Adminstrator".

sir, i have a sony handycam [dcr-trv 285e- pal].but problem is software given is not getting installed in my laptop with windows vista. so iam unable to use movie maker trough my computer.so please do the needfull. th
Software not loading in my pc with widdows vista thanking you.

make sure you have taken all the backup of your data from your system bcoz xp will not overwrite on vista you need to be format your drive which will erase your data. for installing windowx xp you need win xp cd as well as all the driver for win xp bcoz the driver is diffrent for vista and win xp . if you have windows xp bootable cd just place in your cd-rom or in dvd rom .and go to bios setup (bios setup is just press the del button from your keyboard or f2 key it is display whrn you start your system )and change the booting sequnce from hdd to cd rom when it will boot from cd one massage will come press any key to continue just press the space bar and follow the setup instruction . if you need more help let me know bye