NEED FRONT SCREEN THAT FITS OVER SCREEN

I know who answered the other question, do you want to attempt the hard reset for this model?

Projection TV sets have several common problems listed below.

Problem #1) Convergence

Symptoms:

• Screen Looks 3D
• Colors wont align
• Screen may look distorted
• No Audio/Video - TV makes a chirping sound.

Problem #2 CRT Fluid has clouded over. Symtoms

• Dull looking video
• White looking video
• Halos around objects
• Red/Orange looking video

You can see some examples and find a fix here...

http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

mitsubishi in california is only company you can buy this item from,,unless you can find someone that is junking a set,,I have purchased these before,and most likley they won't sell to you as they support dealers only, so give yourself a trade name if you happen to call them, and tell them you pay tax, this should work
From Wendell

looks like voltage reg.in the power supply need replace.

you probably have a problem with the convergence board.

your colorwheel may be going bad

I can help you unlock your Mitsubishi HDTV V-Chip.

Please follow these steps to bypass the vchip or reset the V Chip password.

I hope that helps.
_______________________________________________
Reset Mitsubishi HDTV VChip Password
Bypass Mitsubishi HDTV Front Panel Lock

These are fairly simple, remove the speaker cover and then remove the screws at the bottom of the screen, then the whole thing lifts up and off, be sure to unplug the front panel controls, this plug can usaly be found just behind the cover behind the speaker grill

You would have to completely take the Mirror out or Mylar backing and being careful not to damage anything, trying to move and reassemble when you get at the new location.

have a tech lift off the eeprom or the microchip out of the set,that will rset your tv.and bring it back to normal.good luck.