Hi, i have a flx-2211b element electronics tv and I have a xbox 360 hooked up to it through a HDMI cable but the tv says unsupported mode. what do i do to fix it?

Yes you need a Roku, Apple Tv or something that will connect your tv to your router. This will plug into your tv with an HDMI cable and connect to your router wirelessly or to your modem directly if you don't have a router.

I had the same issue with this TV in my hotel room. I set the FLX3211B TV up as an extension of my laptop, but had to change the refresh rate from the default 58p Hz to 60p Hz for the digital TV display. Once I did this, it came right up.

Try e-mailing their service dept.
murf427

Hook your X Box into the Receiver HDMI input with your HDMI cable and another HDMI cable from the HDMI out on the receiver to the HDMI input on your TV.

that normally means that the TV doesn't support the software version...need to contact either the tv makers support number, or Xbox.com/support, and explain your problem.... maybe there is a setting on your TV that can change the setting for your hdmi input

I have a 22inch element TV. just 1 year old. When it is turned on picture fades in and out.still have sound.it is connected to cable.

there is a switch on the av cable that says tv or hdmi be sure the cabel is selected to hdmi. or try to check all that chanels that that an input in them

check that the wire coming from the xbox 360 elite to the tv is switched to hd, and the other end of the wire has the red and white for the sound pluged into the tv and that the red green and blue wires are pluged into the tv. also check to see if the hdmi cable to conected to the tv and xbox 360 elite.

Hi have you tried going into the menu option using the telly controll and switching the hd mode on this should then allow you to use the xbox through hdmi cable

Make sure both the xbox and tv are on and tv is on HDMI source. It won't recognize each other unless xbox is turned on and tv is set to the correct source.