My burners won't light - Kitchen Ranges

Igniter could still be faulty(not hot enough) or burner control valve
faulty. press the helpful button and check link videos below
Gas Stove Top Burners Not Lighting Not Working

Gas Stove Ignitor and Burner Not Lighting

Daddy Chores Gas range won ignite How to fix it

Is the gas valve turned all the way on ? If so you will either need to replace the flame sensor, or you have a bad gas valve and it will need replacing. Hope this helps !!!

The clicking sound is from the ignition, but you do not have gas at the burner, I think it could be thermocouple.

sounds like the igniter is faulty try a local h/ware or plumbing shop for a new piezo ignition

What is the complete model number of the unit?

Replace the "igniter switch assembly". The igniter's are getting a weak spark and since you have one that will not spark at all, this is the usual problem. Here is the assembly to order.




The part comes with a 365 day, any part, any reason return policy.

The burner is lighting back to the injector on the gas control. 2 things burner out of postion or burner is blocked needs cleaning, you can remove this and clean with air line or small bottle brush.

Is the igniter glowing red?

Do you mean it won't match light or the ignitor won't spark and light the burners? Or both?

If it won't match light or the ignitor sparks, but the burners don't light, that means you're not getting gas to the burners.

Check to the tank valve and make sure it's turned ON. Also, make sure that there's gas in the tank.
If both of those check out as OK, turn the gas tank valve OFF. Disconnect the hose from the tank and wait 5 minutes. Reconnect the hose to the tank and turn the tank valve ON VERY, VERY SLOWLY (Slow motion, slow). Once the valve is fully open, light the burner farthest from the tank first and turn it to HIGH. Did the burner light and the flame height looks correct? If so, light the remaining burners following the same procedure. Now, are they all lit and the flames heights look correct? If so, you solve the problem. Just remember to always open the tank valve very, very slowly.

if the burners failed to light. Remove and clean all the burners, as well as the venturi valve on the open of each burner. Spiders like to build nest in the venturi valves.

if cleaning the burners did not solve the problem, you will need to replace the grill's hose/regulator assembly. You can find it in any home center or hardware store that sells gas grills and accessories, for about $30.00. Take you old one with you for comparison purposes.

Hope this helped you troubleshoot and solve the problem. Please be kind enough to let me know. Thanks and Happy grilling!!