Bosch exxcel 1200 express spinning slowly

check pump

this sounds like motor bearings. you can find them inside the motor. you may need a few tools.

try the manufactures website for free manual download

why life so unfair ?

I had F63 on Bosch washing machine (Maxx 7). I waited 5 days for a repairman and all he did was reset the washing machine processor, like this: 1. Turn the program knob to 6 o'clock 2. Hold the RPM button 3. While the RPM button is held, turn the program knob 1 click clockwise (to Rinse) 4. Release the RPM button.
This is similar to F21 which also happened to my machine. Apparently both errors are related to power surge/power cut.

i had this problem,no drain or spin,opened the flap at bottom right hand corner and pulled out small hose to drain machine opened circular filter cover (some water may come out) and found a 5p and 1p blocking filter after removing ,machine worked fine.
hope this helps

Check and clean filter located at bottom front front right oif washer, another possibility is worn brushes in the motor.

I think you press and hold for ten secs to clear its a childlock

I had the same problem- machiine not spinning and a few days later not turning at all. Display would go from 11min to 1min.
I did 2 things - 1) changed the brushes on the motor- cost £7.50 .
2) whilst working under the machine disconnected pipe from drum to pump and emptied it- found 2 coins in the bellows.

Try unplugging it for about 15 min let the computer reset if that doesn't work.The basket might be thrown of you migt have to call the repair guy's.