Dazzle Instant DVD Recorder keeps telling me "this application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem." I've tried installing this software three times to no avail. It used to work before my PC crashed and had reinstall all my programs since. The softaware has created short-cuts on my desktop and system tray that once you select the icon, the above windows error pops.:{

Set the compatibility back to windows 7 and then uninstall the program and all of it's drivers, then reinstall it and see if it works then.

Hello Joshua,



Instant DVD Recorder 2.6.1 UPDATER

• Please install the Instant DVD Recorder 2.6.1 UPDATER if you are using the Dazzle DVD Video Recorder, Dazzle Video Creator or Dazzle Video Creator Platinum with a previous version of Instant DVD Recorder. This updater also includes the hardware drivers.
• If you are using a Dazzle product already that includes Instant DVD Recorder version 2.6.1, then you do not need to install this update.

New with this version:

• added support for Windows Vista 64 bit and Windows 7 (32 & 64 bit)(
• Includes Windows Vista and Windows 7 drivers (for both 32 and 64 bit) for the DVC 100, 101, 103, 107 hardware NOTE: DVC130 and DVC170 don't have 64 bit drivers and can only be used with Windows XP and Windows Vista 32)
• 16x9 detection
• PCM Audio (already included with Instant DVD Recorder ver. 2.5)

Supported Hardware:

• Dazzle Video Recorder ( DVC90) - Windows XP and Vista 32 bit only
• Dazzle Video Creator ( DVC130) - Windows XP and Vista 32 bit only
• Dazzle Video Creator Platinum ( DVC170) - Windows XP and Vista 32 bit only
• Dazzle Video Creator ( DVC100 and DVC101) - Windows XP 32 bit, Windows Vista and Windows 7 (32 bit and Vista 64 bit)
• Dazzle Video Creator ( DVC103) - Windows XP 32 bit, Windows Vista and Windows 7 (32 bit and Vista 64 bit)
• Dazzle Video Creator Platinum ( DVC107) Windows XP 32 bit, Windows Vista and Windows 7 (32 bit and Vista 64 bit)
• and other compatible hardware

Installation Instruction:

• To be able to install this version, you must own an Instant DVD Recorder Version 2.x full version
• To install this Instant DVD Recorder version not as an update but as a full version you need to enter your Instant DVD Recorder Version 2.x serial number during the installation process. The serial number was included in your Dazzle product.
• With Windows Vista 64 bit or Windows 7 64 bit, you need to install Instant DVD recorder 2.6.1 as a full version.
• If you own an Instant DVD Recorder Version 1.x full version, to only install Instant DVD Recorder 2.6.1 full version.
• If you use this Instant DVD Recorder Updater to update the Instant DVD Recorder included with Studio Version 12, 11 or 10, please make sure that Instant DVD Recorder is already installed on you system. Please note that the version of Instant DVD Recorder included with Studio Version 12, 11 or 10 can't be installed under Windows Vista 64.

For Windows XP

http://apps.pinnaclesys.com/cdb/register/enter.aspx?checkRegistration=1&langue_id=7&supportFileID=35261&productid=2250


For Windows Vista 32 Bit

http://apps.pinnaclesys.com/cdb/register/enter.aspx?checkRegistration=1&langue_id=7&supportFileID=35261&productid=2250

For Windows Vista 64 Bit

http://apps.pinnaclesys.com/cdb/register/enter.aspx?checkRegistration=1&langue_id=7&supportFileID=35261&productid=2250

For Windows 7

http://apps.pinnaclesys.com/cdb/register/enter.aspx?checkRegistration=1&langue_id=7&supportFileID=35261&productid=2250

Hello!!!

You can reinstall it easily by following below Steps :

1. Download this installer : http://www.filehippo.com/download_yahoo_messenger/download/120679041d997dc3e015bd0898f8041d/

2. Run the Setup and Install it.

3. Start Yahoo messenger from Desktop.

4. Enjoy..!!!

Hope this Helps..!!!

Uninstall previous YM than when you install again change the name of the destination directory ( ex: C:Program FilesYahoo2 ) ...it works for me.
First reinstall Microsoft Visual C++ 2005 Redistributable from here:
http://www.microsoft.com/downloads/details.aspx?familyid=32bc1bee-a3f9-4c13-9c99-220b62a191ee&displaylang=en

Please check this link http://pinnaclesys.com/PublicSite/us/Products/Consumer+Products/Home+Video/Studio+Plug-Ins/Instant+DVD+Recorder+Support/Download+Area/Drivers+-+Updates/IDVDR261.htm?mode=documents&Display=1 that is for the instant DVD recorder program you can download and install that to your computer. Now if you need Studio program just call Pinnacle customer service and then asked for the replacement disc for $14.95 only.

I think you will need to upgrade your windows installer version.....download it from Here run it and now try ...hope it will work...Good Luck

can view web cam on both hotmail and yahoo

Hello!!
Just check whether u have given space after entering the serial.. Still the same u gotta contact the comapny customer care.. Cheers!!

try uninstalling and reinstalling it.

Please try to uninstall the program Instant DVD Recorder.

Download the latest version of Instant DVD Recorder in the link below which is the 2.6.

http://www.pinnaclesys.com/PublicSite/us/Products/Consumer+Products/Home+Video/Studio+Plug-Ins/Instant+DVD+Recorder+Support/Download+Area/Drivers+-+Updates/IDVDR261.htm?mode=documents&Display=1

Make sure that the program that you have must be uninstall first before you start downloading the file and install it.