Getting error 5e WF7708 samsung front loader. Have cleaned all filters nothing appears to be blocked. But it will not finish a cycle.

The 4E (4C) error indicates that the washing machine has detected that there is a problem with the water supply. The most common reason for this error is a blocked or kinked water supply hose.
Aug 23, 2021

How to resolve 4E or 5E codes on your Samsung Washing ...

https://www.samsung.com > ... > Home Appliance
About featured snippets•
Feedback

People also ask

How do I fix E4 on my washing machine?"); display: inline-block; height: 24px; width: 24px; margin-top: -1px;"> What does E4 mean on a washing machine?"); display: inline-block; height: 24px; width: 24px; margin-top: -1px;"> Feedback

How to resolve a 4E or 4C error code on a washing machine

https://www.samsung.com > ... > Home Appliance
A problem with the water supply is usually the result of low water pressure or a low flow rate on the mains water supply to the machine. This means that the ...
‎Samsung United Kingdom · ‎How to clean the detergent...

If your Samsung washer is in the middle of a drain cycle and the 5E error code shows on your washers display, it means that the water is not properly draining out of the washer. Something may be clogged, jammed, or blocked and thus preventing water from draining out of the washer.
https://removeandreplace.com/2016/11/03/samsung-washer-displays-error-code-5e-message-how-to-clear-error/

HI ,TRY CLEANING OUT THE PUMP FILTER,BEHIND FLAP,THANKS.

Hello,
The 5E error mean:
Pump won’t empty - not draining
As usual with these error codes for not draining the first thing to do is check the pump filter but, on Samsung washing machines, the drain pump itself is often faulty. You can find how to fix this problem on youtube, just text it "Samsung washing machine 5E error".

Hello & Welcome to FixYa
5E is a water drain error and occurs when the water level frequency does not show changes. First clean the debris filter located at the bottom of the washer and then turn the unit back on after 15 minutes. Please get back to me if you have any other questions.
Kevin

Sometimes this is caused by debris jamming the pump.

Have a look at:

http://www.fixya.com/support/t335614-draining_issues

Good luck.

Error code 5E is the code telling you that you will need to clean the filter. After you clean the filter the code will go away.

Hi dear.5E code meaning on Samsung washer's,DRAIN fault.1-Please check drain hose for kink or clogged where it gets end.2-Please slowly open the machine's filter & drain the water inside the washer.Take out the filter & check it,if there is any thing blocks the filter or pump,try to clean it & put it back.It should comes back to normal.(If non of that's happening you might have defactive pump,call service centre.)Run the spin program & make sure it's draining now.I hope that helps.Thanks.

Can you get me the model number? Thank You!

E1 : washing machine has exceeded a check time for fill, heat or empty.

Common causes for this are fill and empty problems, heater fault (or the wiring
to it broken), water pump open circuit (although that would stop the water draining too) Pressure chamber blocked or pressure tubing pipe looped below the pressure bottle, or a sticking eco ball in the sump hose (sludge and grease build up)


This error code is generic and vey common.Since you have tried the remedies.Try getting checked the internal wiring damage by professionals.I hope certainly hope the problem lies there.