How do i reset my television back its original color

The best way to reset your hardware is to actually contact the Manufacturer. Ask how to reset the TV to FACTORY Settings. Original settings are generally the basic and best method to view TV from the start.

You should be able to find the option in the menu or generally factory sets them close to the middle.

U have the tv original remote wright?Yes?Push the tv remote button that said Menu.Go into the tv Menu at already or goto PICTURE than go down to do a resetting than everything will return itself back to the factory setting and now just go to the Colors Setting lower -30 less than the colors on the tv now ur tv should be good and have a correct pictures coloring.

You may have to do a reset in service mode....sorry - don't have the guide but it should be in the usermanual for this model.

you need to reset your convergence, if you have the original remote, is there an auto convergence button, if not go to the menu and do it manually, align the colors and the lines will go away

Reset the colors setting back to factory original setting.Should have all colors back to original.Not than ur main tuner signal board is dead,must replaced.

Reset colors,back to factory setting.Colors will be alot darker in ,can turn down colors after reset.

you need to get a remote. order one from ebay there about $20 do a factory reset, and use code 3355. this will reset the unit back to original specs. if no go, use the rem to manually adj the color to ur satisfaction.

can you replace the cable see if problem stay's or go's
if it comes back check for loose connection around that board.

You could try using the first time set-up option and see if that resets it. If you don't have the owners manual it can be found at the following link.
http://www.p4c.philips.com/na4/9/9p6034c/9p6034c_dfu_aen.pdf

There are detailed instructions on how to set the convergence in the manual on page 8.