Could be an easy fix. Try shorting across this fuse protector IP1280 (looks like a resistor)
on the
power board. See more detailed solution I posted in this forum for a
similar
question.
I've jumpered the fuse protector IP1280...it is a yellow resistor looking thing...and, IT WORKS!!! The display functions normally. Now, the next question...is it okay to leave it jumpered? Could I just solder the jump and not have a fuse protector there at all and be okay?
I jumped the IP1280 as well and display is now working again. Not sure if it is OK to leave like this or not? Just twisted it until the two wires made contact.
PS, the actual display board itself looked like something shorted out as it looked burnt under the display. not sure what caused this but guess the fuse protector did it's job?
That is normal. The display is a vacuum tube. The 'getter' to remove impurities. Same reason vacuum tubes have mirrored glass on the top.
×
This is what my display board looked like, thought the problem was here but jumping the fuse protector on the back as already posted solved the problem. Any ideas what might have caused this? Power surge??? All other appliances are fine, no recent power outages here.
That is normal, the display s a vacuum tube. All tubes have a "getter" to remove impurities. It is why tubes have mirror appearance on top.
×
664 views
Usually answered in minutes!
Same problem here since last 3 days...unit just 2 years old. First the disc trays stopped working, had them replaced and now no display although unit works fine...can someone please help with suggested resolution...
I have the same problem but can not seem to locate the part anywhere. Panasonic says no longer available. There has to be somebody that has one
Same problem. Lightly used product for three years. Display just kicked it today.
Sounds like this is widespread. Unacceptable. Panasonic needs to make this right.
I have the same problem to please ! help ! some one.Do not want to throw it away!!!
We have the same problem.No display in the front panel even the power light does not show up ..but the system is working.Did anybody find any solution.Please let us know.If LED is not working how can we fix it.Our model is SC HT833V.
×